robotica.git/PCB/aparte_pcb/midden/midden.kicad_pro, branch zephyrUnnamed repository; edit this file 'description' to name the repository.
https://git.abeltim.com/robotica.git/atom?h=zephyr2025-05-29T11:29:00ZCommunication module.2025-05-29T11:29:00ZAbel Timgit@abeltim.com2025-05-29T11:29:00Zurn:sha1:1f409ffe2f50b2e35761a980c1879a086987b04a
Added Communication module to extra PCB, but the power requerments are either our battery power or 3v, but current lines only allow 5v, so either new lines or an power conversion component.
Need to discuss best option with team.
Also TX/RX lines optional but not available. I2C to UART module?
Also need to discuss.
Signed-off-by: Abel Tim <git@abeltim.com>
almost finished extra pcb2025-05-26T15:24:47ZAbel Timgit@abeltim.com2025-05-26T15:24:47Zurn:sha1:e836ff283a67c7b43a4506f8a6654be5e8500648
The pcb is designed to be single layerd for simplisity, but there are still two unconnected lines, GND and 5V are now both in two seperate sections. Can connect via an wire or update the PCB. Will not spend a lot of time on it now for it is not shure we will use an PCB or just a board with lots of wires on it.
Signed-off-by: Abel Tim <git@abeltim.com>
schroef geaard2024-11-01T16:06:42Zabelabel.tim.t@gmail.com2024-11-01T16:06:42Zurn:sha1:910456e18e69b0decdf647893eceed1e7a0849ef
moet nog onderste schroef
kicker2024-10-19T16:55:12Zabelabel.tim.t@gmail.com2024-10-19T16:55:12Zurn:sha1:3bfb6b5dd6e693ae94f013a5ff018fd83426e8fbpxb2024-10-19T16:42:56Zabelabel.tim.t@gmail.com2024-10-19T16:42:56Zurn:sha1:fd95f65b1004b2524e50d141bdbe127a01a15322p2024-10-18T14:13:17Zabelabel.tim.t@gmail.com2024-10-18T14:13:17Zurn:sha1:f170b1ff384c93f543efc6ad6d18ed92f47e297fpcb's2024-10-17T17:07:32Zabelabel.tim.t@gmail.com2024-10-17T17:07:32Zurn:sha1:20b8f0455d182a7bf934e4064f5308e1f99c7433