UPDATE FOLDER STUCTURE

MOET APARTE_PCB NOG VERWIJDERTEN WINDOWS HEEFT BEST VERGRENDELD

1 files changed, 254 insertions, 0 deletions

diff --git a/CODE/debug/motordriver/nomultiplexer/nomultiplexer.ino b/CODE/debug/motordriver/nomultiplexer/nomultiplexer.ino
new file mode 100644
index 0000000..f6f839c
--- /dev/null
+++ b/CODE/debug/motordriver/nomultiplexer/nomultiplexer.ino
@@ -0,0 +1,254 @@
+//moveohmi = https://robotics.stackexchange.com/questions/7829/how-to-program-a-three-wheel-omni
+//https://www.pololu.com/product/2997
+//https://www.pololu.com/product/4861
+//
+// motor one/A  front
+int m1enA = 1;
+int m1enB = 2;
+int m1pwm1 = 3;
+int m1pwm2 = 4;
+int m1encA = 13;
+int m1encB = 14;
+// motor two/B  left
+int m2enA = 5;
+int m2enB = 6;
+int m2pwm1 = 7;
+int m2pwm2 = 8;
+int m2encA = 15;
+int m2encB = 16;
+// motor three/C    right
+int m3enA = 9;
+int m3enB = 10;
+int m3pwm1 = 11;
+int m3pwm2 = 12;
+int m3encA = 17;
+int m3encB = 18;
+
+double sp = 1.000; //speed in 0-1
+
+double dirA = 0.00;
+double dirB = 0.00;
+double dirC = 0.00;
+double spdA = 0.00;
+double spdB = 0.00;
+double spdC = 0.00;
+double dirrad = 0.00;
+double pi = 3.1415926535897;
+
+double Arpm = 0.00;
+volatile long Aencount = 0;
+unsigned long ALtime = 0;
+unsigned long ACtime = 0;
+unsigned long APtime = 0;
+double Brpm = 0.00;
+volatile long Bencount = 0;
+unsigned long BLtime = 0;
+unsigned long BCtime = 0;
+unsigned long BPtime = 0;
+double Crpm = 0.00;
+volatile long Cencount = 0;
+unsigned long CLtime = 0;
+unsigned long CCtime = 0;
+unsigned long CPtime = 0;
+
+void setup()
+{
+ // set all the motor control pins to outputs
+ pinMode(m1enA, OUTPUT);
+ pinMode(m1enB, OUTPUT);
+ pinMode(m2enA, OUTPUT);
+ pinMode(m2enB, OUTPUT);
+ pinMode(m3enA, OUTPUT);
+ pinMode(m3enB, OUTPUT);
+
+ pinMode(m1pwm1, OUTPUT);
+ pinMode(m1pwm2, OUTPUT);
+ pinMode(m2pwm1, OUTPUT);
+ pinMode(m2pwm2, OUTPUT);
+ pinMode(m3pwm1, OUTPUT);
+ pinMode(m3pwm2, OUTPUT);
+
+ //set encoder pins to input
+ pinMode(m1encA, INPUT);
+ pinMode(m1encB, INPUT);
+ pinMode(m2encA, INPUT);
+ pinMode(m2encB, INPUT);
+ pinMode(m3encA, INPUT);
+ pinMode(m3encB, INPUT);
+ attachInterrupt(digitalPinToInterrupt(m1encA), AencoderISR, CHANGE);
+ attachInterrupt(digitalPinToInterrupt(m1encB), AencoderISR, CHANGE);
+ attachInterrupt(digitalPinToInterrupt(m2encA), BencoderISR, CHANGE);
+ attachInterrupt(digitalPinToInterrupt(m2encB), BencoderISR, CHANGE);
+ attachInterrupt(digitalPinToInterrupt(m3encA), CencoderISR, CHANGE);
+ attachInterrupt(digitalPinToInterrupt(m3encB), CencoderISR, CHANGE);
+}
+
+void AencoderISR() {
+  Aencount++;
+}
+void BencoderISR() {
+  Bencount++;
+}
+void CencoderISR() {
+  Cencount++;
+}
+void Areadenc() {
+  ACtime = micros();
+  APtime = ACtime - ALtime;
+  ALtime = ACtime;
+  Arpm = (Aencount / 211.2) * (60000000.0 / APtime);
+  Serial.print("Motor A RPM: ");
+  Serial.print(Arpm);
+  Serial.print("    Sample period:");
+  Serial.print(APtime);
+  Serial.print("ms, encoder count:");
+  Serial.println(Aencount);
+  Aencount = 0;
+}
+void Breadenc() {
+  BCtime = micros();
+  BPtime = BCtime - BLtime;
+  BLtime = BCtime;
+  Brpm = (Bencount / 211.2) * (60000000.0 / BPtime);
+  Serial.print("Motor B RPM: ");
+  Serial.print(Brpm);
+  Serial.print("    Sample period: ");
+  Serial.print(BPtime);
+  Serial.print(" ms, encoder count: ");
+  Serial.println(Bencount);
+  Bencount = 0;
+}
+void Creadenc() {
+  CCtime = micros();
+  CPtime = CCtime - CLtime;
+  CLtime = CCtime;
+  Crpm = (Cencount / 211.2) * (60000000.0 / CPtime);
+  Serial.print("Motor C RPM: ");
+  Serial.print(Crpm);
+  Serial.print("    Sample period: ");
+  Serial.print(CPtime);
+  Serial.print(" ms, encoder count: ");
+  Serial.println(Cencount);
+  Cencount = 0;
+}
+
+void Amove(double sped) {
+  spdA = abs(sped) * 255.000;
+  analogWrite(m1enA, spdA);
+  digitalWrite(m1enB, LOW);
+  if (sped < 0) {
+    Serial.print("Motor A back ");
+    digitalWrite(m1pwm1, LOW);
+    digitalWrite(m1pwm2, HIGH);
+  } else {
+    Serial.print("Motor A forward ");
+    digitalWrite(m1pwm1, HIGH);
+    digitalWrite(m1pwm2, LOW);
+  } 
+  Serial.println(spdA);
+}
+void Bmove(double sped) {
+  spdB = abs(sped) * 255.000;
+  analogWrite(m2enA, spdB);
+  digitalWrite(m2enB, LOW);
+  if (sped < 0) {
+    Serial.print("Motor B back ");
+    digitalWrite(m2pwm1, LOW);
+    digitalWrite(m2pwm2, HIGH);
+  } else {
+    Serial.print("Motor B forward ");
+    digitalWrite(m2pwm1, HIGH);
+    digitalWrite(m2pwm2, LOW);
+  } 
+  Serial.println(spdB);
+}
+void Cmove(double sped) {
+  spdC = abs(sped) * 255.000;
+  analogWrite(m3enA, spdC);
+  digitalWrite(m3enB, LOW);
+  if (sped < 0) {
+    Serial.print("Motor C back ");
+    digitalWrite(m3pwm1, LOW);
+    digitalWrite(m3pwm2, HIGH);
+  } else {
+    Serial.print("Motor C forward ");
+    digitalWrite(m3pwm1, HIGH);
+    digitalWrite(m3pwm2, LOW);
+  } 
+  Serial.println(spdC);
+}
+
+
+void moveohmi(int speed, int direction){
+  Amove(0);
+  Bmove(0);
+  Cmove(0);
+
+  double dirrad = (direction*71.0000) / 4068.0000;  
+  Serial.println(dirrad);
+  //vector ontb in x en y
+  double y = sin(dirrad);
+  double x = cos(dirrad);
+  Serial.println((String)"x:"+x+" y:"+y);
+  double spdeA = y*speed;
+  double spdeB = (-0.500*x - 0.8660054*y)*speed;
+  double spdeC = (-0.500*x + 0.8660054*y)*speed;
+  Amove(spdeA);
+  Bmove(spdeB);
+  Cmove(spdeC);
+  Serial.println();
+  Serial.println();
+}
+void rotate(int rodeg, int speed){
+//use compas heading
+}
+void demo(){
+  Amove(sp);
+  Bmove(sp);
+  Cmove(sp); 
+  Serial.println("seperate A B C rotation");
+  delay(1000);
+  
+  Amove(0);
+  Bmove(0);
+  Cmove(0);
+  Serial.println("seperate A B C stop");
+  delay(1000);
+
+  Amove(-sp);
+  Bmove(-sp);
+  Cmove(-sp);
+  Serial.println("seperate A B C -rotation");
+  delay(1000);
+
+  moveohmi(0, 0);
+  Serial.println("ohmi stop");
+  delay(1000);
+
+  rotate(90, sp);
+  Serial.println("rotation function 90deg");
+  rotate(90, sp);
+  Serial.println("rotation function -90deg");
+  delay(1000);
+
+  moveohmi(sp, 35);
+  Serial.println("ohmi move 35deg");
+  delay(1000);
+
+  moveohmi(sp, 240);
+  Serial.println("ohmi move 215deg");
+  delay(1000);
+
+  for(int i = 0; i<360; i++){
+    moveohmi(sp, i);
+    Serial.println(i);
+    delay(50);
+  }
+  Serial.println("ohmi move circle");
+  delay(1000);
+}
+void loop(){
+  demo();
+  delay(100);
+
+}