almost finished extra pcb

The pcb is designed to be single layerd for simplisity, but there are still two unconnected lines, GND and 5V are now both in two seperate sections. Can connect via an wire or update the PCB. Will not spend a lot of time on it now for it is not shure we will use an PCB or just a board with lots of wires on it.

Signed-off-by: Abel Tim <git@abeltim.com>

1 files changed, 219 insertions, 5 deletions

diff --git a/PCB/aparte_pcb/Extra board/Extra board.kicad_pro b/PCB/aparte_pcb/Extra board/Extra board.kicad_pro
index d100ae7..541cbc8 100644
--- a/PCB/aparte_pcb/Extra board/Extra board.kicad_pro
+++ b/PCB/aparte_pcb/Extra board/Extra board.kicad_pro
@@ -2,12 +2,226 @@
   "board": {
     "3dviewports": [],
     "design_settings": {
-      "defaults": {},
-      "diff_pair_dimensions": [],
+      "defaults": {
+        "apply_defaults_to_fp_fields": false,
+        "apply_defaults_to_fp_shapes": false,
+        "apply_defaults_to_fp_text": false,
+        "board_outline_line_width": 0.05,
+        "copper_line_width": 0.2,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.05,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": true,
+          "text_position": 0,
+          "units_format": 0
+        },
+        "fab_line_width": 0.1,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.1,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 1.1,
+          "height": 1.6,
+          "width": 1.6
+        },
+        "silk_line_width": 0.1,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.1,
+        "silk_text_upright": false,
+        "zones": {
+          "min_clearance": 0.5
+        }
+      },
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
       "drc_exclusions": [],
-      "rules": {},
-      "track_widths": [],
-      "via_dimensions": []
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "connection_width": "warning",
+        "copper_edge_clearance": "error",
+        "copper_sliver": "warning",
+        "courtyards_overlap": "error",
+        "creepage": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint": "error",
+        "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_mismatch": "warning",
+        "footprint_type_mismatch": "ignore",
+        "hole_clearance": "error",
+        "hole_to_hole": "warning",
+        "holes_co_located": "warning",
+        "invalid_outline": "error",
+        "isolated_copper": "warning",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "lib_footprint_issues": "warning",
+        "lib_footprint_mismatch": "warning",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "mirrored_text_on_front_layer": "warning",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "nonmirrored_text_on_back_layer": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "warning",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_edge_clearance": "warning",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "solder_mask_bridge": "error",
+        "starved_thermal": "error",
+        "text_height": "warning",
+        "text_thickness": "warning",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_angle": "error",
+        "track_dangling": "warning",
+        "track_segment_length": "error",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_connection": 0.0,
+        "min_copper_edge_clearance": 0.5,
+        "min_groove_width": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.2,
+        "min_microvia_drill": 0.1,
+        "min_resolved_spokes": 2,
+        "min_silk_clearance": 0.0,
+        "min_text_height": 0.8,
+        "min_text_thickness": 0.08,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.0,
+        "min_via_annular_width": 0.1,
+        "min_via_diameter": 0.5,
+        "solder_mask_to_copper_clearance": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "teardrop_options": [
+        {
+          "td_onpthpad": true,
+          "td_onroundshapesonly": false,
+          "td_onsmdpad": true,
+          "td_ontrackend": false,
+          "td_onvia": true
+        }
+      ],
+      "teardrop_parameters": [
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_round_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_rect_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_track_end",
+          "td_width_to_size_filter_ratio": 0.9
+        }
+      ],
+      "track_widths": [
+        0.0,
+        12.7
+      ],
+      "tuning_pattern_settings": {
+        "diff_pair_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 1.0
+        },
+        "diff_pair_skew_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        },
+        "single_track_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        }
+      },
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        }
+      ],
+      "zones_allow_external_fillets": false
     },
     "ipc2581": {
       "dist": "",