summaryrefslogtreecommitdiff
path: root/CODE/debug/Scanner
diff options
context:
space:
mode:
Diffstat (limited to 'CODE/debug/Scanner')
-rw-r--r--CODE/debug/Scanner/Scanner.ino194
1 files changed, 0 insertions, 194 deletions
diff --git a/CODE/debug/Scanner/Scanner.ino b/CODE/debug/Scanner/Scanner.ino
deleted file mode 100644
index 879dbd6..0000000
--- a/CODE/debug/Scanner/Scanner.ino
+++ /dev/null
@@ -1,194 +0,0 @@
-// Wire Scanner - scans for I2C devices on all Wire ports
-//
-// This Wire library adapted is for Teensy boards
-//
-// https://github.com/PaulStoffregen/Wire/
-//
-// Adapted from I2C Scanner originally published on Arduino Playground
-// see comments below for link and credits for original authors.
-
-#include <Wire.h>
-
-void setup() {
-#if WIRE_INTERFACES_COUNT >= 1
- //Wire.setSCL(16); // uncomment these to use alternate Wire pins
- //Wire.setSDA(17);
- Wire.begin();
-#endif
- Serial.begin(9600);
- while (!Serial); // Wait for Arduino Serial Monitor
- Serial.println(F("\nI2C Scanner"));
-}
-
-
-void loop() {
- Serial.println();
-#if WIRE_INTERFACES_COUNT >= 1
- Serial.println(F("Scanning Wire..."));
- scan(Wire);
- delay(500);
-#endif
- delay(2000); // wait 5 seconds for next scan
-}
-
-
-void scan(TwoWire &myport) {
- int nDevices = 0;
- for (int address = 1; address < 127; address++) {
- // The i2c_scanner uses the return value of
- // the Write.endTransmisstion to see if
- // a device did acknowledge to the address.
- myport.beginTransmission(address);
- int error = myport.endTransmission();
-
- if (error == 0) {
- Serial.print(F("Device found at address 0x"));
- if (address < 16) {
- Serial.print("0");
- }
- Serial.print(address,HEX);
- Serial.print(" (");
- printKnownChips(address);
- Serial.println(")");
- nDevices++;
- } else if (error==4) {
- Serial.print(F("Unknown error at address 0x"));
- if (address < 16) {
- Serial.print("0");
- }
- Serial.println(address,HEX);
- }
- }
- if (nDevices == 0) {
- Serial.println(F("No I2C devices found"));
- } else {
- Serial.println(F("done"));
- }
- Serial.println();
-}
-
-
-void printKnownChips(byte address)
-{
- // Is this list missing part numbers for chips you use?
- // Please suggest additions here:
- // https://github.com/PaulStoffregen/Wire/issues/new
- switch (address) {
- case 0x00: Serial.print(F("AS3935")); break;
- case 0x01: Serial.print(F("AS3935")); break;
- case 0x02: Serial.print(F("AS3935")); break;
- case 0x03: Serial.print(F("AS3935")); break;
- case 0x04: Serial.print(F("ADAU1966")); break;
- case 0x0A: Serial.print(F("SGTL5000")); break; // MCLK required
- case 0x0B: Serial.print(F("SMBusBattery?")); break;
- case 0x0C: Serial.print(F("AK8963")); break;
- case 0x10: Serial.print(F("CS4272")); break;
- case 0x11: Serial.print(F("Si4713")); break;
- case 0x13: Serial.print(F("VCNL4000,AK4558")); break;
- case 0x18: Serial.print(F("LIS331DLH")); break;
- case 0x19: Serial.print(F("LSM303,LIS331DLH")); break;
- case 0x1A: Serial.print(F("WM8731")); break;
- case 0x1C: Serial.print(F("LIS3MDL")); break;
- case 0x1D: Serial.print(F("LSM303D,LSM9DS0,ADXL345,MMA7455L,LSM9DS1,LIS3DSH")); break;
- case 0x1E: Serial.print(F("LSM303D,HMC5883L,FXOS8700,LIS3DSH")); break;
- case 0x20: Serial.print(F("MCP23017,MCP23008,PCF8574,FXAS21002,SoilMoisture")); break;
- case 0x21: Serial.print(F("MCP23017,MCP23008,PCF8574")); break;
- case 0x22: Serial.print(F("MCP23017,MCP23008,PCF8574")); break;
- case 0x23: Serial.print(F("MCP23017,MCP23008,PCF8574")); break;
- case 0x24: Serial.print(F("MCP23017,MCP23008,PCF8574,ADAU1966,HM01B0")); break;
- case 0x25: Serial.print(F("MCP23017,MCP23008,PCF8574")); break;
- case 0x26: Serial.print(F("MCP23017,MCP23008,PCF8574")); break;
- case 0x27: Serial.print(F("MCP23017,MCP23008,PCF8574,LCD16x2,DigoleDisplay")); break;
- case 0x28: Serial.print(F("BNO055,EM7180,CAP1188")); break;
- case 0x29: Serial.print(F("TSL2561,VL6180,TSL2561,TSL2591,BNO055,CAP1188")); break;
- case 0x2A: Serial.print(F("SGTL5000,CAP1188")); break;
- case 0x2B: Serial.print(F("CAP1188")); break;
- case 0x2C: Serial.print(F("MCP44XX ePot")); break;
- case 0x2D: Serial.print(F("MCP44XX ePot")); break;
- case 0x2E: Serial.print(F("MCP44XX ePot")); break;
- case 0x2F: Serial.print(F("MCP44XX ePot")); break;
- case 0x30: Serial.print(F("Si7210")); break;
- case 0x31: Serial.print(F("Si7210")); break;
- case 0x32: Serial.print(F("Si7210")); break;
- case 0x33: Serial.print(F("MAX11614,MAX11615,Si7210,MLX90640,MLX90641")); break;
- case 0x34: Serial.print(F("MAX11612,MAX11613")); break;
- case 0x35: Serial.print(F("MAX11616,MAX11617")); break;
- case 0x38: Serial.print(F("RA8875,FT6206,MAX98390")); break;
- case 0x39: Serial.print(F("TSL2561, APDS9960")); break;
- case 0x3A: Serial.print(F("MLX90632")); break;
- case 0x3C: Serial.print(F("SSD1306,DigisparkOLED")); break;
- case 0x3D: Serial.print(F("SSD1306")); break;
- case 0x40: Serial.print(F("PCA9685,Si7021,MS8607")); break;
- case 0x41: Serial.print(F("STMPE610,PCA9685")); break;
- case 0x42: Serial.print(F("PCA9685")); break;
- case 0x43: Serial.print(F("PCA9685")); break;
- case 0x44: Serial.print(F("PCA9685, SHT3X, ADAU1966")); break;
- case 0x45: Serial.print(F("PCA9685, SHT3X")); break;
- case 0x46: Serial.print(F("PCA9685")); break;
- case 0x47: Serial.print(F("PCA9685")); break;
- case 0x48: Serial.print(F("ADS1115,PN532,TMP102,LM75,PCF8591,CS42448")); break;
- case 0x49: Serial.print(F("ADS1115,TSL2561,PCF8591,CS42448,TC74A1")); break;
- case 0x4A: Serial.print(F("ADS1115,Qwiic Keypad,CS42448")); break;
- case 0x4B: Serial.print(F("ADS1115,TMP102,BNO080,Qwiic Keypad,CS42448")); break;
- case 0x50: Serial.print(F("EEPROM,FRAM")); break;
- case 0x51: Serial.print(F("EEPROM")); break;
- case 0x52: Serial.print(F("Nunchuk,EEPROM")); break;
- case 0x53: Serial.print(F("ADXL345,EEPROM")); break;
- case 0x54: Serial.print(F("EEPROM")); break;
- case 0x55: Serial.print(F("EEPROM")); break;
- case 0x56: Serial.print(F("EEPROM")); break;
- case 0x57: Serial.print(F("EEPROM")); break;
- case 0x58: Serial.print(F("TPA2016,MAX21100")); break;
- case 0x5A: Serial.print(F("MPR121,MLX90614")); break;
- case 0x60: Serial.print(F("MPL3115,MCP4725,MCP4728,TEA5767,Si5351")); break;
- case 0x61: Serial.print(F("MCP4725,AtlasEzoDO")); break;
- case 0x62: Serial.print(F("LidarLite,MCP4725,AtlasEzoORP")); break;
- case 0x63: Serial.print(F("MCP4725,AtlasEzoPH")); break;
- case 0x64: Serial.print(F("AtlasEzoEC, ADAU1966")); break;
- case 0x66: Serial.print(F("AtlasEzoRTD")); break;
- case 0x68: Serial.print(F("DS1307,DS3231,MPU6050,MPU9050,MPU9250,ITG3200,ITG3701,LSM9DS0,L3G4200D")); break;
- case 0x69: Serial.print(F("MPU6050,MPU9050,MPU9250,ITG3701,L3G4200D")); break;
- case 0x6A: Serial.print(F("LSM9DS1")); break;
- case 0x6B: Serial.print(F("LSM9DS0")); break;
- case 0x6F: Serial.print(F("Qwiic Button")); break;
- case 0x70: Serial.print(F("HT16K33,TCA9548A")); break;
- case 0x71: Serial.print(F("SFE7SEG,HT16K33")); break;
- case 0x72: Serial.print(F("HT16K33")); break;
- case 0x73: Serial.print(F("HT16K33")); break;
- case 0x76: Serial.print(F("MS5607,MS5611,MS5637,BMP280")); break;
- case 0x77: Serial.print(F("BMP085,BMA180,BMP280,MS5611")); break;
- case 0x7C: Serial.print(F("FRAM_ID")); break;
- default: Serial.print(F("unknown chip"));
- }
-}
-
-
-// --------------------------------------
-// i2c_scanner
-// https://playground.arduino.cc/Main/I2cScanner/
-//
-// Version 1
-// This program (or code that looks like it)
-// can be found in many places.
-// For example on the Arduino.cc forum.
-// The original author is not know.
-// Version 2, Juni 2012, Using Arduino 1.0.1
-// Adapted to be as simple as possible by Arduino.cc user Krodal
-// Version 3, Feb 26 2013
-// V3 by louarnold
-// Version 4, March 3, 2013, Using Arduino 1.0.3
-// by Arduino.cc user Krodal.
-// Changes by louarnold removed.
-// Scanning addresses changed from 0...127 to 1...119,
-// according to the i2c scanner by Nick Gammon
-// http://www.gammon.com.au/forum/?id=10896
-// Version 5, March 28, 2013
-// As version 4, but address scans now to 127.
-// A sensor seems to use address 120.
-// Version 6, November 27, 2015.
-// Added waiting for the Leonardo serial communication.
-//
-//
-// This sketch tests the standard 7-bit addresses
-// Devices with higher bit address might not be seen properly.
-//
generated by cgit v1.2.3 (git 2.46.0) at 2026-09-30 05:10:59 +0000