3 files changed, 0 insertions, 29 deletions
diff --git a/CODE/debug/comm/seeed-teensy/readme.txt.txt b/CODE/debug/comm/seeed-teensy/readme.txt.txt
deleted file mode 100644
index ef9f996..0000000
--- a/CODE/debug/comm/seeed-teensy/readme.txt.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-serial communication between two Seeed Studio XIAO SAMD21 and one teensy.
-Teensy Serial 2 and 3 on read
-Seeed XIAO SAMD21 write a 8 values on Serial1 between 0-10000 (pulses from IR sensor) every 0,25 seconds. For example 100 pulses in 1 second = 00025
diff --git a/CODE/debug/comm/seeed-teensy/seeed_uart/seeed_uart.ino b/CODE/debug/comm/seeed-teensy/seeed_uart/seeed_uart.ino
deleted file mode 100644
index 32750de..0000000
--- a/CODE/debug/comm/seeed-teensy/seeed_uart/seeed_uart.ino
+++ /dev/null
@@ -1,9 +0,0 @@
-void setup() {
-  Serial1.begin(9600)
-
-}
-
-void loop() {
-  Serial1.println("/D:00025:/E");
-  delay(250);
-}
diff --git a/CODE/debug/comm/seeed-teensy/teensy_uard_read/teensy_uard_read.ino b/CODE/debug/comm/seeed-teensy/teensy_uard_read/teensy_uard_read.ino
deleted file mode 100644
index 684c199..0000000
--- a/CODE/debug/comm/seeed-teensy/teensy_uard_read/teensy_uard_read.ino
+++ /dev/null
@@ -1,17 +0,0 @@
-void setup() {
-  // Initialize Serial1 with a baud rate of 19200
-  Serial1.begin(9600);
-  Serial.begin(9600); // Initialize Serial for debugging
-}
-
-void loop() {
-  // Check if there is any data available to read from Serial1
-  if (Serial1.available()) {
-    // Read the most recent byte
-    byte byteRead = Serial1.read();
-    // Echo the value that was read
-    Serial1.write(byteRead);
-    // Print the received byte for debugging
-    Serial.print((char)byteRead);
-  }
-}