From 764c8722596f5b3bd01bb26848f7289b0972d7b0 Mon Sep 17 00:00:00 2001
From: Abel Tim <abel.tim.t@gmail.com>
Date: Sun, 23 Mar 2025 12:38:48 +0100
Subject: updated repo structure

---
 .../prewk/comm/uart/arduino_uart/arduino_uart.ino  | 17 ---------
 CODE/debug/prewk/comm/uart/arduino_uart_1.py       | 42 ----------------------
 2 files changed, 59 deletions(-)
 delete mode 100644 CODE/debug/prewk/comm/uart/arduino_uart/arduino_uart.ino
 delete mode 100644 CODE/debug/prewk/comm/uart/arduino_uart_1.py

(limited to 'CODE/debug/prewk/comm/uart')

diff --git a/CODE/debug/prewk/comm/uart/arduino_uart/arduino_uart.ino b/CODE/debug/prewk/comm/uart/arduino_uart/arduino_uart.ino
deleted file mode 100644
index 6385695..0000000
--- a/CODE/debug/prewk/comm/uart/arduino_uart/arduino_uart.ino
+++ /dev/null
@@ -1,17 +0,0 @@
-void setup() {
-  // Initialize Serial1 with a baud rate of 19200
-  Serial1.begin(19200);
-  Serial.begin(19200); // Initialize Serial for debugging
-}
-
-void loop() {
-  // Check if there is any data available to read from Serial1
-  if (Serial1.available()) {
-    // Read the most recent byte
-    byte byteRead = Serial1.read();
-    // Echo the value that was read
-    Serial1.write(byteRead);
-    // Print the received byte for debugging
-    Serial.print((char)byteRead);
-  }
-}
diff --git a/CODE/debug/prewk/comm/uart/arduino_uart_1.py b/CODE/debug/prewk/comm/uart/arduino_uart_1.py
deleted file mode 100644
index 3996cf7..0000000
--- a/CODE/debug/prewk/comm/uart/arduino_uart_1.py
+++ /dev/null
@@ -1,42 +0,0 @@
-# This work is licensed under the MIT license.
-# Copyright (c) 2013-2023 OpenMV LLC. All rights reserved.
-# https://github.com/openmv/openmv/blob/master/LICENSE
-#
-# Basic UART communications between OpenMV and Arduino Uno.
-
-# 1) Wire up your OpenMV Cam to your Arduino Uno like this:
-#
-# OpenMV Cam Ground Pin   ----> Arduino Ground
-# OpenMV Cam UART3_TX(P4) ----> Arduino Uno UART_RX(0)
-# OpenMV Cam UART3_RX(P5) ----> Arduino Uno UART_TX(1)
-
-# 2) Uncomment and upload the following sketch to Arduino:
-#
-# void setup() {
-#   // put your setup code here, to run once:
-#   Serial.begin(19200);
-# }
-#
-# void loop() {
-#   // put your main code here, to run repeatedly:
-#   if (Serial.available()) {
-#     // Read the most recent byte
-#     byte byteRead = Serial.read();
-#     // ECHO the value that was read
-#     Serial.write(byteRead);
-#   }
-# }
-
-# 3) Run the following script in OpenMV IDE:
-
-import time
-from pyb import UART
-
-# UART 3, and baudrate.
-uart = UART(3, 19200, timeout_char=200)
-
-while True:
-    uart.write("Hello World!\n")
-    if uart.any():
-        print(uart.read())
-    time.sleep_ms(1000)
-- 
cgit v1.2.3