From caf8e05494fac2bfa96e1f410b4c444b139b6480 Mon Sep 17 00:00:00 2001 From: Abel Tim Date: Mon, 22 Jul 2024 12:18:26 +0200 Subject: change folder struct --- .../openmv-boards-master/openmv4/pro/pins/pins.ioc | 737 - .../openmv-boards-master/openmv4/pro/pro-base.brd | 9789 --------- .../openmv-boards-master/openmv4/pro/pro-base.pdf | Bin 1195340 -> 0 bytes .../openmv-boards-master/openmv4/pro/pro-base.sch | 19724 ------------------- 4 files changed, 30250 deletions(-) delete mode 100644 pcb_boven/openmv/openmv-boards-master/openmv4/pro/pins/pins.ioc delete mode 100644 pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.brd delete mode 100644 pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.pdf delete mode 100644 pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.sch (limited to 'pcb_boven/openmv/openmv-boards-master/openmv4/pro') diff --git a/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pins/pins.ioc b/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pins/pins.ioc deleted file mode 100644 index f105ebd..0000000 --- a/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pins/pins.ioc +++ /dev/null @@ -1,737 +0,0 @@ -#MicroXplorer Configuration settings - do not modify -ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_8 -ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag -ADC1.NbrOfConversionFlag=1 -ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE -ADC1.Rank-0\#ChannelRegularConversion=1 -ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5 -ADC1.master=1 -CORTEX_M7.CPU_DCache=Enabled -CORTEX_M7.CPU_ICache=Enabled -CORTEX_M7.IPParameters=CPU_ICache,CPU_DCache -File.Version=6 -GPIO.groupedBy=Show All -I2C1.IPParameters=Timing -I2C1.Timing=0x307075B1 -I2C2.IPParameters=Timing -I2C2.Timing=0x307075B1 -I2C4.IPParameters=Timing -I2C4.Timing=0x307075B1 -KeepUserPlacement=false -Mcu.Family=STM32H7 -Mcu.IP0=ADC1 -Mcu.IP1=CORTEX_M7 -Mcu.IP10=JPEG -Mcu.IP11=NVIC -Mcu.IP12=QUADSPI -Mcu.IP13=RCC -Mcu.IP14=RNG -Mcu.IP15=SDMMC1 -Mcu.IP16=SDMMC2 -Mcu.IP17=SPI2 -Mcu.IP18=SPI6 -Mcu.IP19=SYS -Mcu.IP2=CRC -Mcu.IP20=TIM1 -Mcu.IP21=TIM2 -Mcu.IP22=TIM3 -Mcu.IP23=TIM12 -Mcu.IP24=UART7 -Mcu.IP25=USB_OTG_HS -Mcu.IP3=DCMI -Mcu.IP4=DEBUG -Mcu.IP5=DMA2D -Mcu.IP6=FMC -Mcu.IP7=I2C1 -Mcu.IP8=I2C2 -Mcu.IP9=I2C4 -Mcu.IPNb=26 -Mcu.Name=STM32H743IIKx -Mcu.Package=UFBGA176 -Mcu.Pin0=PE3 -Mcu.Pin1=PE2 -Mcu.Pin10=PD7 -Mcu.Pin100=PD13 -Mcu.Pin101=PA1 -Mcu.Pin102=PA0 -Mcu.Pin103=PA4 -Mcu.Pin104=PC4 -Mcu.Pin105=PF13 -Mcu.Pin106=PG0 -Mcu.Pin107=PE13 -Mcu.Pin108=PH7 -Mcu.Pin109=PD12 -Mcu.Pin11=PC12 -Mcu.Pin110=PD11 -Mcu.Pin111=PD10 -Mcu.Pin112=PA2 -Mcu.Pin113=PA6 -Mcu.Pin114=PA5 -Mcu.Pin115=PC5 -Mcu.Pin116=PF12 -Mcu.Pin117=PF15 -Mcu.Pin118=PE8 -Mcu.Pin119=PE9 -Mcu.Pin12=PA15 (JTDI) -Mcu.Pin120=PE11 -Mcu.Pin121=PE14 -Mcu.Pin122=PB12 -Mcu.Pin123=PB13 -Mcu.Pin124=PD9 -Mcu.Pin125=PD8 -Mcu.Pin126=PA3 -Mcu.Pin127=PA7 -Mcu.Pin128=PB1 -Mcu.Pin129=PB0 -Mcu.Pin13=PA14 (JTCK/SWCLK) -Mcu.Pin130=PF11 -Mcu.Pin131=PF14 -Mcu.Pin132=PE7 -Mcu.Pin133=PE10 -Mcu.Pin134=PE12 -Mcu.Pin135=PE15 -Mcu.Pin136=PB10 -Mcu.Pin137=PB11 -Mcu.Pin138=PB14 -Mcu.Pin139=PB15 -Mcu.Pin14=PA13 (JTMS/SWDIO) -Mcu.Pin140=VP_CRC_VS_CRC -Mcu.Pin141=VP_DMA2D_VS_DMA2D -Mcu.Pin142=VP_JPEG_VS_JPEG -Mcu.Pin143=VP_RNG_VS_RNG -Mcu.Pin144=VP_SYS_VS_Systick -Mcu.Pin15=PE4 -Mcu.Pin16=PE5 -Mcu.Pin17=PE6 -Mcu.Pin18=PB9 -Mcu.Pin19=PB7 -Mcu.Pin2=PE1 -Mcu.Pin20=PB6 -Mcu.Pin21=PG15 -Mcu.Pin22=PG12 -Mcu.Pin23=PG11 -Mcu.Pin24=PG10 -Mcu.Pin25=PD6 -Mcu.Pin26=PD0 -Mcu.Pin27=PC11 -Mcu.Pin28=PC10 -Mcu.Pin29=PA12 -Mcu.Pin3=PE0 -Mcu.Pin30=PI7 -Mcu.Pin31=PI6 -Mcu.Pin32=PI5 -Mcu.Pin33=PG9 -Mcu.Pin34=PD5 -Mcu.Pin35=PD1 -Mcu.Pin36=PI3 -Mcu.Pin37=PI2 -Mcu.Pin38=PA11 -Mcu.Pin39=PC13 -Mcu.Pin4=PB8 -Mcu.Pin40=PI8 -Mcu.Pin41=PI9 -Mcu.Pin42=PI4 -Mcu.Pin43=PD4 -Mcu.Pin44=PD3 -Mcu.Pin45=PD2 -Mcu.Pin46=PH15 -Mcu.Pin47=PI1 -Mcu.Pin48=PA10 -Mcu.Pin49=PC14-OSC32_IN (OSC32_IN) -Mcu.Pin5=PB5 -Mcu.Pin50=PF0 -Mcu.Pin51=PI10 -Mcu.Pin52=PI11 -Mcu.Pin53=PH13 -Mcu.Pin54=PH14 -Mcu.Pin55=PI0 -Mcu.Pin56=PA9 -Mcu.Pin57=PC15-OSC32_OUT (OSC32_OUT) -Mcu.Pin58=PH2 -Mcu.Pin59=PC9 -Mcu.Pin6=PG14 -Mcu.Pin60=PA8 -Mcu.Pin61=PH0-OSC_IN (PH0) -Mcu.Pin62=PH3 -Mcu.Pin63=PC8 -Mcu.Pin64=PC7 -Mcu.Pin65=PH1-OSC_OUT (PH1) -Mcu.Pin66=PF2 -Mcu.Pin67=PF1 -Mcu.Pin68=PH4 -Mcu.Pin69=PG8 -Mcu.Pin7=PG13 -Mcu.Pin70=PC6 -Mcu.Pin71=PF3 -Mcu.Pin72=PF4 -Mcu.Pin73=PH5 -Mcu.Pin74=PG7 -Mcu.Pin75=PG6 -Mcu.Pin76=PF7 -Mcu.Pin77=PF6 -Mcu.Pin78=PF5 -Mcu.Pin79=PH12 -Mcu.Pin8=PB4 (NJTRST) -Mcu.Pin80=PG5 -Mcu.Pin81=PG4 -Mcu.Pin82=PG3 -Mcu.Pin83=PF10 -Mcu.Pin84=PF9 -Mcu.Pin85=PF8 -Mcu.Pin86=PH11 -Mcu.Pin87=PH10 -Mcu.Pin88=PD15 -Mcu.Pin89=PG2 -Mcu.Pin9=PB3 (JTDO/TRACESWO) -Mcu.Pin90=PC0 -Mcu.Pin91=PC1 -Mcu.Pin92=PC2_C -Mcu.Pin93=PC3_C -Mcu.Pin94=PB2 -Mcu.Pin95=PG1 -Mcu.Pin96=PH6 -Mcu.Pin97=PH8 -Mcu.Pin98=PH9 -Mcu.Pin99=PD14 -Mcu.PinsNb=145 -Mcu.ThirdPartyNb=0 -Mcu.UserConstants= -Mcu.UserName=STM32H743IIKx -MxCube.Version=5.6.0 -MxDb.Version=DB.5.0.60 -NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.ForceEnableDMAVector=true -NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 -NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true -NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -PA0.Signal=S_TIM2_CH1 -PA1.Signal=S_TIM2_CH2 -PA10.Mode=Slave_8_bits_External_Synchro -PA10.Signal=DCMI_D1 -PA11.Mode=NSS_Signal_Hard_Output -PA11.Signal=SPI2_NSS -PA12.Mode=Full_Duplex_Master -PA12.Signal=SPI2_SCK -PA13\ (JTMS/SWDIO).Mode=Serial_Wire -PA13\ (JTMS/SWDIO).Signal=DEBUG_JTMS-SWDIO -PA14\ (JTCK/SWCLK).Mode=Serial_Wire -PA14\ (JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK -PA15\ (JTDI).Mode=NSS_Signal_Hard_Output -PA15\ (JTDI).Signal=SPI6_NSS -PA2.Signal=S_TIM2_CH3 -PA3.Mode=Device_HS -PA3.Signal=USB_OTG_HS_ULPI_D0 -PA4.Mode=Slave_8_bits_External_Synchro -PA4.Signal=DCMI_HSYNC -PA5.Mode=Device_HS -PA5.Signal=USB_OTG_HS_ULPI_CK -PA6.Mode=Slave_8_bits_External_Synchro -PA6.Signal=DCMI_PIXCLK -PA7.Signal=FMC_SDNWE -PA8.Signal=S_TIM1_CH1 -PA9.Mode=Slave_8_bits_External_Synchro -PA9.Signal=DCMI_D0 -PB0.Mode=Device_HS -PB0.Signal=USB_OTG_HS_ULPI_D1 -PB1.Mode=Device_HS -PB1.Signal=USB_OTG_HS_ULPI_D2 -PB10.Mode=Device_HS -PB10.Signal=USB_OTG_HS_ULPI_D3 -PB11.Mode=Device_HS -PB11.Signal=USB_OTG_HS_ULPI_D4 -PB12.Mode=Device_HS -PB12.Signal=USB_OTG_HS_ULPI_D5 -PB13.Mode=Device_HS -PB13.Signal=USB_OTG_HS_ULPI_D6 -PB14.Mode=SD_4_bits_Wide_bus -PB14.Signal=SDMMC2_D0 -PB15.Mode=SD_4_bits_Wide_bus -PB15.Signal=SDMMC2_D1 -PB2.GPIOParameters=GPIO_Label -PB2.GPIO_Label=WL_REG_ON -PB2.Locked=true -PB2.Signal=GPIO_Output -PB3\ (JTDO/TRACESWO).Mode=SD_4_bits_Wide_bus -PB3\ (JTDO/TRACESWO).Signal=SDMMC2_D2 -PB4\ (NJTRST).Mode=SD_4_bits_Wide_bus -PB4\ (NJTRST).Signal=SDMMC2_D3 -PB5.Mode=Device_HS -PB5.Signal=USB_OTG_HS_ULPI_D7 -PB6.Mode=I2C -PB6.Signal=I2C4_SCL -PB7.Mode=I2C -PB7.Signal=I2C4_SDA -PB8.Mode=I2C -PB8.Signal=I2C1_SCL -PB9.Locked=true -PB9.Mode=I2C -PB9.Signal=I2C1_SDA -PC0.Mode=Device_HS -PC0.Signal=USB_OTG_HS_ULPI_STP -PC1.Mode=Full_Duplex_Master -PC1.Signal=SPI2_MOSI -PC10.Mode=SD_4_bits_Wide_bus -PC10.Signal=SDMMC1_D2 -PC11.Mode=SD_4_bits_Wide_bus -PC11.Signal=SDMMC1_D3 -PC12.Mode=SD_4_bits_Wide_bus -PC12.Signal=SDMMC1_CK -PC13.GPIOParameters=GPIO_Label -PC13.GPIO_Label=DCMI_RST -PC13.Locked=true -PC13.Signal=GPIO_Output -PC14-OSC32_IN\ (OSC32_IN).Mode=LSE-External-Clock-Source -PC14-OSC32_IN\ (OSC32_IN).Signal=RCC_OSC32_IN -PC15-OSC32_OUT\ (OSC32_OUT).GPIOParameters=GPIO_Label -PC15-OSC32_OUT\ (OSC32_OUT).GPIO_Label=USBEN -PC15-OSC32_OUT\ (OSC32_OUT).Locked=true -PC15-OSC32_OUT\ (OSC32_OUT).Signal=GPIO_Output -PC2_C.Mode=Full_Duplex_Master -PC2_C.Signal=SPI2_MISO -PC3_C.Mode=Device_HS -PC3_C.Signal=USB_OTG_HS_ULPI_NXT -PC4.GPIOParameters=GPIO_Label -PC4.GPIO_Label=WL_HOST_WAKE -PC4.Locked=true -PC4.Signal=GPIO_Output -PC5.Locked=true -PC5.Signal=ADCx_INP8 -PC6.Signal=S_TIM3_CH1 -PC7.Signal=S_TIM3_CH2 -PC8.Mode=SD_4_bits_Wide_bus -PC8.Signal=SDMMC1_D0 -PC9.Mode=SD_4_bits_Wide_bus -PC9.Signal=SDMMC1_D1 -PD0.Signal=FMC_D2_DA2 -PD1.Signal=FMC_D3_DA3 -PD10.Signal=FMC_D15_DA15 -PD11.Mode=Single Bank 1 -PD11.Signal=QUADSPI_BK1_IO0 -PD12.Mode=Single Bank 1 -PD12.Signal=QUADSPI_BK1_IO1 -PD13.Mode=Single Bank 1 -PD13.Signal=QUADSPI_BK1_IO3 -PD14.Signal=FMC_D0_DA0 -PD15.Signal=FMC_D1_DA1 -PD2.Mode=SD_4_bits_Wide_bus -PD2.Signal=SDMMC1_CMD -PD3.Mode=Slave_8_bits_External_Synchro -PD3.Signal=DCMI_D5 -PD4.GPIOParameters=GPIO_Label -PD4.GPIO_Label=P9 -PD4.Locked=true -PD4.Signal=GPIO_Output -PD5.GPIOParameters=GPIO_Label -PD5.GPIO_Label=P10 -PD5.Locked=true -PD5.Signal=GPIO_Output -PD6.Mode=SD_4_bits_Wide_bus -PD6.Signal=SDMMC2_CK -PD7.Mode=SD_4_bits_Wide_bus -PD7.Signal=SDMMC2_CMD -PD8.Signal=FMC_D13_DA13 -PD9.Signal=FMC_D14_DA14 -PE0.Signal=FMC_NBL0 -PE1.Signal=FMC_NBL1 -PE10.Signal=FMC_D7_DA7 -PE11.Signal=FMC_D8_DA8 -PE12.Signal=FMC_D9_DA9 -PE13.Signal=FMC_D10_DA10 -PE14.Signal=FMC_D11_DA11 -PE15.Signal=FMC_D12_DA12 -PE2.Mode=Single Bank 1 -PE2.Signal=QUADSPI_BK1_IO2 -PE3.GPIOParameters=GPIO_Label -PE3.GPIO_Label=BT_REG_ON -PE3.Locked=true -PE3.Signal=GPIO_Output -PE4.Mode=Slave_8_bits_External_Synchro -PE4.Signal=DCMI_D4 -PE5.Mode=Slave_8_bits_External_Synchro -PE5.Signal=DCMI_D6 -PE6.Mode=Slave_8_bits_External_Synchro -PE6.Signal=DCMI_D7 -PE7.Signal=FMC_D4_DA4 -PE8.Signal=FMC_D5_DA5 -PE9.Signal=FMC_D6_DA6 -PF0.Signal=FMC_A0 -PF1.Signal=FMC_A1 -PF10.Mode=Single Bank 1 -PF10.Signal=QUADSPI_CLK -PF11.Signal=FMC_SDNRAS -PF12.Signal=FMC_A6 -PF13.Signal=FMC_A7 -PF14.Signal=FMC_A8 -PF15.Signal=FMC_A9 -PF2.Signal=FMC_A2 -PF3.Signal=FMC_A3 -PF4.Signal=FMC_A4 -PF5.Signal=FMC_A5 -PF6.Mode=Asynchronous -PF6.Signal=UART7_RX -PF7.Mode=Asynchronous -PF7.Signal=UART7_TX -PF8.Mode=CTS_RTS -PF8.Signal=UART7_RTS -PF9.Mode=CTS_RTS -PF9.Signal=UART7_CTS -PG0.Signal=FMC_A10 -PG1.Signal=FMC_A11 -PG10.Mode=Slave_8_bits_External_Synchro -PG10.Signal=DCMI_D2 -PG11.Mode=Slave_8_bits_External_Synchro -PG11.Signal=DCMI_D3 -PG12.Mode=Full_Duplex_Master -PG12.Signal=SPI6_MISO -PG13.Mode=Full_Duplex_Master -PG13.Signal=SPI6_SCK -PG14.Mode=Full_Duplex_Master -PG14.Signal=SPI6_MOSI -PG15.Signal=FMC_SDNCAS -PG2.GPIOParameters=GPIO_Speed,GPIO_Label -PG2.GPIO_Label=I2C_RST -PG2.GPIO_Speed=GPIO_SPEED_FREQ_LOW -PG2.Locked=true -PG2.Signal=GPIO_Output -PG3.GPIOParameters=GPIO_Label -PG3.GPIO_Label=BT_HOST_WAKE -PG3.Locked=true -PG3.Signal=GPIO_Output -PG4.Signal=FMC_A14_BA0 -PG5.Signal=FMC_A15_BA1 -PG6.Mode=Single Bank 1 -PG6.Signal=QUADSPI_BK1_NCS -PG7.GPIOParameters=GPIO_Label -PG7.GPIO_Label=SD_CD -PG7.Locked=true -PG7.Signal=GPIO_Input -PG8.Signal=FMC_SDCLK -PG9.Mode=Slave_8_bits_External_Synchro -PG9.Signal=DCMI_VSYNC -PH0-OSC_IN\ (PH0).Mode=HSE-External-Clock-Source -PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN -PH1-OSC_OUT\ (PH1).GPIOParameters=GPIO_Label -PH1-OSC_OUT\ (PH1).GPIO_Label=OSCEN -PH1-OSC_OUT\ (PH1).Locked=true -PH1-OSC_OUT\ (PH1).Signal=GPIO_Output -PH10.Signal=FMC_D18 -PH11.Signal=FMC_D19 -PH12.Signal=FMC_D20 -PH13.Signal=FMC_D21 -PH14.Signal=FMC_D22 -PH15.Signal=FMC_D23 -PH2.Mode=SdramChipSelect1_1 -PH2.Signal=FMC_SDCKE0 -PH3.Mode=SdramChipSelect1_1 -PH3.Signal=FMC_SDNE0 -PH4.Mode=I2C -PH4.Signal=I2C2_SCL -PH5.Mode=I2C -PH5.Signal=I2C2_SDA -PH6.Signal=S_TIM12_CH1 -PH7.GPIOParameters=GPIO_Label -PH7.GPIO_Label=BT_DEV_WAKE -PH7.Locked=true -PH7.Signal=GPIO_Output -PH8.Signal=FMC_D16 -PH9.Signal=FMC_D17 -PI0.Signal=FMC_D24 -PI1.Signal=FMC_D25 -PI10.Signal=FMC_D31 -PI11.Mode=Device_HS -PI11.Signal=USB_OTG_HS_ULPI_DIR -PI2.Signal=FMC_D26 -PI3.Signal=FMC_D27 -PI4.Signal=FMC_NBL2 -PI5.Signal=FMC_NBL3 -PI6.Signal=FMC_D28 -PI7.Signal=FMC_D29 -PI8.GPIOParameters=GPIO_Label -PI8.GPIO_Label=DCMI_PWDN -PI8.Locked=true -PI8.Signal=GPIO_Output -PI9.Signal=FMC_D30 -PinOutPanel.CurrentBGAView=Top -PinOutPanel.RotationAngle=0 -ProjectManager.AskForMigrate=true -ProjectManager.BackupPrevious=false -ProjectManager.CompilerOptimize=6 -ProjectManager.ComputerToolchain=false -ProjectManager.CoupleFile=false -ProjectManager.CustomerFirmwarePackage= -ProjectManager.DefaultFWLocation=true -ProjectManager.DeletePrevious=true -ProjectManager.DeviceId=STM32H743IIKx -ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.7.0 -ProjectManager.FreePins=false -ProjectManager.HalAssertFull=false -ProjectManager.HeapSize=0x200 -ProjectManager.KeepUserCode=true -ProjectManager.LastFirmware=true -ProjectManager.LibraryCopy=0 -ProjectManager.MainLocation=Src -ProjectManager.NoMain=false -ProjectManager.PreviousToolchain= -ProjectManager.ProjectBuild=false -ProjectManager.ProjectFileName=pins.ioc -ProjectManager.ProjectName=pins -ProjectManager.RegisterCallBack= -ProjectManager.StackSize=0x400 -ProjectManager.TargetToolchain=EWARM V8.32 -ProjectManager.ToolChainLocation= -ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_ADC1_Init-ADC1-false-HAL-true,4-MX_CRC_Init-CRC-false-HAL-true,5-MX_DCMI_Init-DCMI-false-HAL-true,6-MX_DMA2D_Init-DMA2D-false-HAL-true,7-MX_FMC_Init-FMC-false-HAL-true,8-MX_I2C1_Init-I2C1-false-HAL-true,9-MX_I2C2_Init-I2C2-false-HAL-true,10-MX_I2C4_Init-I2C4-false-HAL-true,11-MX_JPEG_Init-JPEG-false-HAL-true,12-MX_QUADSPI_Init-QUADSPI-false-HAL-true,13-MX_RNG_Init-RNG-false-HAL-true,14-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,15-MX_SDMMC2_SD_Init-SDMMC2-false-HAL-true,16-MX_SPI2_Init-SPI2-false-HAL-true,17-MX_SPI6_Init-SPI6-false-HAL-true,18-MX_TIM1_Init-TIM1-false-HAL-true,19-MX_TIM2_Init-TIM2-false-HAL-true,20-MX_TIM3_Init-TIM3-false-HAL-true,21-MX_TIM12_Init-TIM12-false-HAL-true,22-MX_UART7_Init-UART7-false-HAL-true,23-MX_USB_OTG_HS_PCD_Init-USB_OTG_HS-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true -RCC.ADCCLockSelection=RCC_ADCCLKSOURCE_PLL3 -RCC.ADCFreq_Value=160000000 -RCC.AHB12Freq_Value=240000000 -RCC.AHB4Freq_Value=240000000 -RCC.APB1Freq_Value=120000000 -RCC.APB2Freq_Value=120000000 -RCC.APB3Freq_Value=120000000 -RCC.APB4Freq_Value=120000000 -RCC.AXIClockFreq_Value=240000000 -RCC.CECFreq_Value=32000 -RCC.CKPERFreq_Value=64000000 -RCC.CortexFreq_Value=480000000 -RCC.CpuClockFreq_Value=480000000 -RCC.D1CPREFreq_Value=480000000 -RCC.D1PPRE=RCC_APB3_DIV2 -RCC.D2PPRE1=RCC_APB1_DIV2 -RCC.D2PPRE2=RCC_APB2_DIV2 -RCC.D3PPRE=RCC_APB4_DIV2 -RCC.DFSDMACLkFreq_Value=48000000 -RCC.DFSDMFreq_Value=120000000 -RCC.DIVM1=6 -RCC.DIVM2=6 -RCC.DIVM3=6 -RCC.DIVN1=240 -RCC.DIVN2=100 -RCC.DIVN3=80 -RCC.DIVP1Freq_Value=480000000 -RCC.DIVP2Freq_Value=200000000 -RCC.DIVP3Freq_Value=160000000 -RCC.DIVQ1=20 -RCC.DIVQ1Freq_Value=48000000 -RCC.DIVQ2Freq_Value=200000000 -RCC.DIVQ3Freq_Value=160000000 -RCC.DIVR1Freq_Value=480000000 -RCC.DIVR2Freq_Value=200000000 -RCC.DIVR3Freq_Value=160000000 -RCC.FDCANFreq_Value=48000000 -RCC.FMCCLockSelection=RCC_FMCCLKSOURCE_PLL2 -RCC.FMCFreq_Value=200000000 -RCC.FamilyName=M -RCC.HCLK3ClockFreq_Value=240000000 -RCC.HCLKFreq_Value=240000000 -RCC.HPRE=RCC_HCLK_DIV2 -RCC.HRTIMFreq_Value=240000000 -RCC.HSE_VALUE=24000000 -RCC.I2C123Freq_Value=120000000 -RCC.I2C4Freq_Value=120000000 -RCC.IPParameters=ADCCLockSelection,ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,D1PPRE,D2PPRE1,D2PPRE2,D3PPRE,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,FDCANFreq_Value,FMCCLockSelection,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HRTIMFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLLSourceVirtual,QSPICLockSelection,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123CLockSelection,SPI123Freq_Value,SPI45Freq_Value,SPI6CLockSelection,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value -RCC.LPTIM1Freq_Value=120000000 -RCC.LPTIM2Freq_Value=120000000 -RCC.LPTIM345Freq_Value=120000000 -RCC.LPUART1Freq_Value=120000000 -RCC.LTDCFreq_Value=160000000 -RCC.MCO1PinFreq_Value=64000000 -RCC.MCO2PinFreq_Value=480000000 -RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE -RCC.QSPICLockSelection=RCC_QSPICLKSOURCE_PLL2 -RCC.QSPIFreq_Value=200000000 -RCC.RNGFreq_Value=48000000 -RCC.RTCFreq_Value=32000 -RCC.SAI1Freq_Value=48000000 -RCC.SAI23Freq_Value=48000000 -RCC.SAI4AFreq_Value=48000000 -RCC.SAI4BFreq_Value=48000000 -RCC.SDMMCFreq_Value=48000000 -RCC.SPDIFRXFreq_Value=48000000 -RCC.SPI123CLockSelection=RCC_SPI123CLKSOURCE_PLL3 -RCC.SPI123Freq_Value=160000000 -RCC.SPI45Freq_Value=120000000 -RCC.SPI6CLockSelection=RCC_SPI6CLKSOURCE_PLL3 -RCC.SPI6Freq_Value=160000000 -RCC.SWPMI1Freq_Value=120000000 -RCC.SYSCLKFreq_VALUE=480000000 -RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK -RCC.Tim1OutputFreq_Value=240000000 -RCC.Tim2OutputFreq_Value=240000000 -RCC.TraceFreq_Value=480000000 -RCC.USART16Freq_Value=120000000 -RCC.USART234578Freq_Value=120000000 -RCC.USBFreq_Value=48000000 -RCC.VCO1OutputFreq_Value=960000000 -RCC.VCO2OutputFreq_Value=400000000 -RCC.VCO3OutputFreq_Value=320000000 -RCC.VCOInput1Freq_Value=4000000 -RCC.VCOInput2Freq_Value=4000000 -RCC.VCOInput3Freq_Value=4000000 -SH.ADCx_INP8.0=ADC1_INP8,IN8-Single-Ended -SH.ADCx_INP8.ConfNb=1 -SH.FMC_A0.0=FMC_A0,12b-sda1 -SH.FMC_A0.ConfNb=1 -SH.FMC_A1.0=FMC_A1,12b-sda1 -SH.FMC_A1.ConfNb=1 -SH.FMC_A10.0=FMC_A10,12b-sda1 -SH.FMC_A10.ConfNb=1 -SH.FMC_A11.0=FMC_A11,12b-sda1 -SH.FMC_A11.ConfNb=1 -SH.FMC_A14_BA0.0=FMC_BA0,FourSdramBanks1 -SH.FMC_A14_BA0.ConfNb=1 -SH.FMC_A15_BA1.0=FMC_BA1,FourSdramBanks1 -SH.FMC_A15_BA1.ConfNb=1 -SH.FMC_A2.0=FMC_A2,12b-sda1 -SH.FMC_A2.ConfNb=1 -SH.FMC_A3.0=FMC_A3,12b-sda1 -SH.FMC_A3.ConfNb=1 -SH.FMC_A4.0=FMC_A4,12b-sda1 -SH.FMC_A4.ConfNb=1 -SH.FMC_A5.0=FMC_A5,12b-sda1 -SH.FMC_A5.ConfNb=1 -SH.FMC_A6.0=FMC_A6,12b-sda1 -SH.FMC_A6.ConfNb=1 -SH.FMC_A7.0=FMC_A7,12b-sda1 -SH.FMC_A7.ConfNb=1 -SH.FMC_A8.0=FMC_A8,12b-sda1 -SH.FMC_A8.ConfNb=1 -SH.FMC_A9.0=FMC_A9,12b-sda1 -SH.FMC_A9.ConfNb=1 -SH.FMC_D0_DA0.0=FMC_D0,sd-32b-d1 -SH.FMC_D0_DA0.ConfNb=1 -SH.FMC_D10_DA10.0=FMC_D10,sd-32b-d1 -SH.FMC_D10_DA10.ConfNb=1 -SH.FMC_D11_DA11.0=FMC_D11,sd-32b-d1 -SH.FMC_D11_DA11.ConfNb=1 -SH.FMC_D12_DA12.0=FMC_D12,sd-32b-d1 -SH.FMC_D12_DA12.ConfNb=1 -SH.FMC_D13_DA13.0=FMC_D13,sd-32b-d1 -SH.FMC_D13_DA13.ConfNb=1 -SH.FMC_D14_DA14.0=FMC_D14,sd-32b-d1 -SH.FMC_D14_DA14.ConfNb=1 -SH.FMC_D15_DA15.0=FMC_D15,sd-32b-d1 -SH.FMC_D15_DA15.ConfNb=1 -SH.FMC_D16.0=FMC_D16,sd-32b-d1 -SH.FMC_D16.ConfNb=1 -SH.FMC_D17.0=FMC_D17,sd-32b-d1 -SH.FMC_D17.ConfNb=1 -SH.FMC_D18.0=FMC_D18,sd-32b-d1 -SH.FMC_D18.ConfNb=1 -SH.FMC_D19.0=FMC_D19,sd-32b-d1 -SH.FMC_D19.ConfNb=1 -SH.FMC_D1_DA1.0=FMC_D1,sd-32b-d1 -SH.FMC_D1_DA1.ConfNb=1 -SH.FMC_D20.0=FMC_D20,sd-32b-d1 -SH.FMC_D20.ConfNb=1 -SH.FMC_D21.0=FMC_D21,sd-32b-d1 -SH.FMC_D21.ConfNb=1 -SH.FMC_D22.0=FMC_D22,sd-32b-d1 -SH.FMC_D22.ConfNb=1 -SH.FMC_D23.0=FMC_D23,sd-32b-d1 -SH.FMC_D23.ConfNb=1 -SH.FMC_D24.0=FMC_D24,sd-32b-d1 -SH.FMC_D24.ConfNb=1 -SH.FMC_D25.0=FMC_D25,sd-32b-d1 -SH.FMC_D25.ConfNb=1 -SH.FMC_D26.0=FMC_D26,sd-32b-d1 -SH.FMC_D26.ConfNb=1 -SH.FMC_D27.0=FMC_D27,sd-32b-d1 -SH.FMC_D27.ConfNb=1 -SH.FMC_D28.0=FMC_D28,sd-32b-d1 -SH.FMC_D28.ConfNb=1 -SH.FMC_D29.0=FMC_D29,sd-32b-d1 -SH.FMC_D29.ConfNb=1 -SH.FMC_D2_DA2.0=FMC_D2,sd-32b-d1 -SH.FMC_D2_DA2.ConfNb=1 -SH.FMC_D30.0=FMC_D30,sd-32b-d1 -SH.FMC_D30.ConfNb=1 -SH.FMC_D31.0=FMC_D31,sd-32b-d1 -SH.FMC_D31.ConfNb=1 -SH.FMC_D3_DA3.0=FMC_D3,sd-32b-d1 -SH.FMC_D3_DA3.ConfNb=1 -SH.FMC_D4_DA4.0=FMC_D4,sd-32b-d1 -SH.FMC_D4_DA4.ConfNb=1 -SH.FMC_D5_DA5.0=FMC_D5,sd-32b-d1 -SH.FMC_D5_DA5.ConfNb=1 -SH.FMC_D6_DA6.0=FMC_D6,sd-32b-d1 -SH.FMC_D6_DA6.ConfNb=1 -SH.FMC_D7_DA7.0=FMC_D7,sd-32b-d1 -SH.FMC_D7_DA7.ConfNb=1 -SH.FMC_D8_DA8.0=FMC_D8,sd-32b-d1 -SH.FMC_D8_DA8.ConfNb=1 -SH.FMC_D9_DA9.0=FMC_D9,sd-32b-d1 -SH.FMC_D9_DA9.ConfNb=1 -SH.FMC_NBL0.0=FMC_NBL0,Sd4ByteEnable1 -SH.FMC_NBL0.ConfNb=1 -SH.FMC_NBL1.0=FMC_NBL1,Sd4ByteEnable1 -SH.FMC_NBL1.ConfNb=1 -SH.FMC_NBL2.0=FMC_NBL2,Sd4ByteEnable1 -SH.FMC_NBL2.ConfNb=1 -SH.FMC_NBL3.0=FMC_NBL3,Sd4ByteEnable1 -SH.FMC_NBL3.ConfNb=1 -SH.FMC_SDCLK.0=FMC_SDCLK,12b-sda1 -SH.FMC_SDCLK.ConfNb=1 -SH.FMC_SDNCAS.0=FMC_SDNCAS,12b-sda1 -SH.FMC_SDNCAS.ConfNb=1 -SH.FMC_SDNRAS.0=FMC_SDNRAS,12b-sda1 -SH.FMC_SDNRAS.ConfNb=1 -SH.FMC_SDNWE.0=FMC_SDNWE,12b-sda1 -SH.FMC_SDNWE.ConfNb=1 -SH.S_TIM12_CH1.0=TIM12_CH1,Output Compare1 CH1 -SH.S_TIM12_CH1.ConfNb=1 -SH.S_TIM1_CH1.0=TIM1_CH1,Output Compare1 CH1 -SH.S_TIM1_CH1.ConfNb=1 -SH.S_TIM2_CH1.0=TIM2_CH1,Output Compare1 CH1 -SH.S_TIM2_CH1.ConfNb=1 -SH.S_TIM2_CH2.0=TIM2_CH2,Output Compare2 CH2 -SH.S_TIM2_CH2.ConfNb=1 -SH.S_TIM2_CH3.0=TIM2_CH3,Output Compare3 CH3 -SH.S_TIM2_CH3.ConfNb=1 -SH.S_TIM3_CH1.0=TIM3_CH1,Output Compare1 CH1 -SH.S_TIM3_CH1.ConfNb=1 -SH.S_TIM3_CH2.0=TIM3_CH2,Output Compare2 CH2 -SH.S_TIM3_CH2.ConfNb=1 -SPI2.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_2 -SPI2.CalculateBaudRate=80.0 MBits/s -SPI2.Direction=SPI_DIRECTION_2LINES -SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS,BaudRatePrescaler -SPI2.Mode=SPI_MODE_MASTER -SPI2.VirtualNSS=VM_NSSHARD -SPI2.VirtualType=VM_MASTER -SPI6.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_2 -SPI6.CalculateBaudRate=80.0 MBits/s -SPI6.Direction=SPI_DIRECTION_2LINES -SPI6.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS,BaudRatePrescaler -SPI6.Mode=SPI_MODE_MASTER -SPI6.VirtualNSS=VM_NSSHARD -SPI6.VirtualType=VM_MASTER -TIM1.Channel-Output\ Compare1\ CH1=TIM_CHANNEL_1 -TIM1.IPParameters=Channel-Output Compare1 CH1 -TIM12.Channel-Output\ Compare1\ CH1=TIM_CHANNEL_1 -TIM12.IPParameters=Channel-Output Compare1 CH1 -TIM2.Channel-Output\ Compare1\ CH1=TIM_CHANNEL_1 -TIM2.Channel-Output\ Compare2\ CH2=TIM_CHANNEL_2 -TIM2.Channel-Output\ Compare3\ CH3=TIM_CHANNEL_3 -TIM2.IPParameters=Channel-Output Compare1 CH1,Channel-Output Compare2 CH2,Channel-Output Compare3 CH3 -TIM3.Channel-Output\ Compare1\ CH1=TIM_CHANNEL_1 -TIM3.Channel-Output\ Compare2\ CH2=TIM_CHANNEL_2 -TIM3.IPParameters=Channel-Output Compare1 CH1,Channel-Output Compare2 CH2 -USB_OTG_HS.IPParameters=VirtualMode-Device_HS -USB_OTG_HS.VirtualMode-Device_HS=Device_HS -VP_CRC_VS_CRC.Mode=CRC_Activate -VP_CRC_VS_CRC.Signal=CRC_VS_CRC -VP_DMA2D_VS_DMA2D.Mode=DMA2D_Activate -VP_DMA2D_VS_DMA2D.Signal=DMA2D_VS_DMA2D -VP_JPEG_VS_JPEG.Mode=JPEG_Activate -VP_JPEG_VS_JPEG.Signal=JPEG_VS_JPEG -VP_RNG_VS_RNG.Mode=RNG_Activate -VP_RNG_VS_RNG.Signal=RNG_VS_RNG -VP_SYS_VS_Systick.Mode=SysTick -VP_SYS_VS_Systick.Signal=SYS_VS_Systick -board=custom diff --git a/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.brd b/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.brd deleted file mode 100644 index 1d51922..0000000 --- a/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.brd +++ /dev/null @@ -1,9789 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -P6 -P4 -P5 -P3 -P2 -P1 -BT0 -RST -P7 -GND -3.3V -VIN -P8 -P0 -3.3V -P6 -P5 -P4 -P3 -P2 -P1 -P0 -GND -VIN -P7 -P8 -RST -BT0 -OpenMV4-PRO R1 -12/28/2021 -VIN Max -Voltage: 5v -P10 -P10 -P9 -P9 - - - - - - - - - - - - - - - - - - - -IR -W -VBUS -GND -GND -VBUS - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - -1007 (2518 metric) package - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -chip - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -chip - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -chip - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -<b>Mounting Holes and Pads</b><p> -<author>Created by librarian@cadsoft.de</author> - - -<b>MOUNTING PAD</b> 2.8 mm, round - - - - - - - - - - - - - - - -MOUNTING PAD 2.8 mm, round - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - -<b>S2B-PH-K-S</b> -<p> -JST PH 2-pin thru-home side entry - - - - - - - - - - - - - - ->NAME -+ -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -Upverter Parts Library - -Created by Upverter.com - - -IC TRANSCEIVER HALF 1/1 32QFN - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -20 ppm, Ultra-Low Power 32.768 kHz Quartz XTAL Replacement - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<- EDGE OF PCB - - - - - - - ->NAME - - - - -Upverter Parts Library - -Created by Upverter.com - - -2 Line Common Mode Choke Surface Mount DCR 4Ohm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -Conn Unshrouded Header HDR 10 POS 1.27mm Solder ST SMD Tube - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - -<h3>SparkFun Connectors</h3> -This library contains electrically-functional connectors. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - -<h3>Plated Through Hole</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole -8 Pin</h3> -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -Plated Through Hole -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - - - - -Plated Through Hole -8 Pin -Specifications: -Pin count:8 -Pin pitch:0.1" - -Example device(s): -CONN_08 - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Resistors, Capacitors, Inductors</b><p> -Based on the previous libraries: -<ul> -<li>r.lbr -<li>cap.lbr -<li>cap-fe.lbr -<li>captant.lbr -<li>polcap.lbr -<li>ipc-smd.lbr -</ul> -All SMD packages are defined according to the IPC specifications and CECC<p> -<author>Created by librarian@cadsoft.de</author><p> -<p> -for Electrolyt Capacitors see also :<p> -www.bccomponents.com <p> -www.panasonic.com<p> -www.kemet.com<p> -http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b> -<p> -for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p> - -<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0> -<tr valign="top"> - -<! <td width="10">&nbsp;</td> -<td width="90%"> - -<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b> -<P> -<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> - <TR> - <TD COLSPAN=8> - <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT> - </TD> - </TR> - <TR> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">BI&nbsp;TECH</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT> - </B> - </TD><TD>&nbsp;</TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 > - 3005P<BR> - 3006P<BR> - 3006W<BR> - 3006Y<BR> - 3009P<BR> - 3009W<BR> - 3009Y<BR> - 3057J<BR> - 3057L<BR> - 3057P<BR> - 3057Y<BR> - 3059J<BR> - 3059L<BR> - 3059P<BR> - 3059Y<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 89P<BR> - 89W<BR> - 89X<BR> - 89PH<BR> - 76P<BR> - 89XH<BR> - 78SLT<BR> - 78L&nbsp;ALT<BR> - 56P&nbsp;ALT<BR> - 78P&nbsp;ALT<BR> - T8S<BR> - 78L<BR> - 56P<BR> - 78P<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - T18/784<BR> - 783<BR> - 781<BR> - -<BR> - -<BR> - -<BR> - 2199<BR> - 1697/1897<BR> - 1680/1880<BR> - 2187<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 8035EKP/CT20/RJ-20P<BR> - -<BR> - RJ-20X<BR> - -<BR> - -<BR> - -<BR> - 1211L<BR> - 8012EKQ&nbsp;ALT<BR> - 8012EKR&nbsp;ALT<BR> - 1211P<BR> - 8012EKJ<BR> - 8012EKL<BR> - 8012EKQ<BR> - 8012EKR<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 2101P<BR> - 2101W<BR> - 2101Y<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 2102L<BR> - 2102S<BR> - 2102Y<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - EVMCOG<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 43P<BR> - 43W<BR> - 43Y<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 40L<BR> - 40P<BR> - 40Y<BR> - 70Y-T602<BR> - 70L<BR> - 70P<BR> - 70Y<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - RT/RTR12<BR> - RT/RTR12<BR> - RT/RTR12<BR> - -<BR> - RJ/RJR12<BR> - RJ/RJR12<BR> - RJ/RJR12<BR></FONT> - </TD> - </TR> - <TR> - <TD COLSPAN=8>&nbsp; - </TD> - </TR> - <TR> - <TD COLSPAN=8> - <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT> - </TD> - </TR> - <TR> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> - </TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 3250L<BR> - 3250P<BR> - 3250W<BR> - 3250X<BR> - 3252P<BR> - 3252W<BR> - 3252X<BR> - 3260P<BR> - 3260W<BR> - 3260X<BR> - 3262P<BR> - 3262W<BR> - 3262X<BR> - 3266P<BR> - 3266W<BR> - 3266X<BR> - 3290H<BR> - 3290P<BR> - 3290W<BR> - 3292P<BR> - 3292W<BR> - 3292X<BR> - 3296P<BR> - 3296W<BR> - 3296X<BR> - 3296Y<BR> - 3296Z<BR> - 3299P<BR> - 3299W<BR> - 3299X<BR> - 3299Y<BR> - 3299Z<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 66P&nbsp;ALT<BR> - 66W&nbsp;ALT<BR> - 66X&nbsp;ALT<BR> - 66P&nbsp;ALT<BR> - 66W&nbsp;ALT<BR> - 66X&nbsp;ALT<BR> - -<BR> - 64W&nbsp;ALT<BR> - -<BR> - 64P&nbsp;ALT<BR> - 64W&nbsp;ALT<BR> - 64X&nbsp;ALT<BR> - 64P<BR> - 64W<BR> - 64X<BR> - 66X&nbsp;ALT<BR> - 66P&nbsp;ALT<BR> - 66W&nbsp;ALT<BR> - 66P<BR> - 66W<BR> - 66X<BR> - 67P<BR> - 67W<BR> - 67X<BR> - 67Y<BR> - 67Z<BR> - 68P<BR> - 68W<BR> - 68X<BR> - 67Y&nbsp;ALT<BR> - 67Z&nbsp;ALT<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 5050<BR> - 5091<BR> - 5080<BR> - 5087<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - T63YB<BR> - T63XB<BR> - -<BR> - -<BR> - -<BR> - 5887<BR> - 5891<BR> - 5880<BR> - -<BR> - -<BR> - -<BR> - T93Z<BR> - T93YA<BR> - T93XA<BR> - T93YB<BR> - T93XB<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 8026EKP<BR> - 8026EKW<BR> - 8026EKM<BR> - 8026EKP<BR> - 8026EKB<BR> - 8026EKM<BR> - 1309X<BR> - 1309P<BR> - 1309W<BR> - 8024EKP<BR> - 8024EKW<BR> - 8024EKN<BR> - RJ-9P/CT9P<BR> - RJ-9W<BR> - RJ-9X<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 3103P<BR> - 3103Y<BR> - 3103Z<BR> - 3103P<BR> - 3103Y<BR> - 3103Z<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 3105P/3106P<BR> - 3105W/3106W<BR> - 3105X/3106X<BR> - 3105Y/3106Y<BR> - 3105Z/3105Z<BR> - 3102P<BR> - 3102W<BR> - 3102X<BR> - 3102Y<BR> - 3102Z<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - EVMCBG<BR> - EVMCCG<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 55-1-X<BR> - 55-4-X<BR> - 55-3-X<BR> - 55-2-X<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 50-2-X<BR> - 50-4-X<BR> - 50-3-X<BR> - -<BR> - -<BR> - -<BR> - 64P<BR> - 64W<BR> - 64X<BR> - 64Y<BR> - 64Z<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - RT/RTR22<BR> - RT/RTR22<BR> - RT/RTR22<BR> - RT/RTR22<BR> - RJ/RJR22<BR> - RJ/RJR22<BR> - RJ/RJR22<BR> - RT/RTR26<BR> - RT/RTR26<BR> - RT/RTR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RT/RTR24<BR> - RT/RTR24<BR> - RT/RTR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - </TR> - <TR> - <TD COLSPAN=8>&nbsp; - </TD> - </TR> - <TR> - <TD COLSPAN=8> - <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> - </TD> - </TR> - <TR> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> - </TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 3323P<BR> - 3323S<BR> - 3323W<BR> - 3329H<BR> - 3329P<BR> - 3329W<BR> - 3339H<BR> - 3339P<BR> - 3339W<BR> - 3352E<BR> - 3352H<BR> - 3352K<BR> - 3352P<BR> - 3352T<BR> - 3352V<BR> - 3352W<BR> - 3362H<BR> - 3362M<BR> - 3362P<BR> - 3362R<BR> - 3362S<BR> - 3362U<BR> - 3362W<BR> - 3362X<BR> - 3386B<BR> - 3386C<BR> - 3386F<BR> - 3386H<BR> - 3386K<BR> - 3386M<BR> - 3386P<BR> - 3386S<BR> - 3386W<BR> - 3386X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 25P<BR> - 25S<BR> - 25RX<BR> - 82P<BR> - 82M<BR> - 82PA<BR> - -<BR> - -<BR> - -<BR> - 91E<BR> - 91X<BR> - 91T<BR> - 91B<BR> - 91A<BR> - 91V<BR> - 91W<BR> - 25W<BR> - 25V<BR> - 25P<BR> - -<BR> - 25S<BR> - 25U<BR> - 25RX<BR> - 25X<BR> - 72XW<BR> - 72XL<BR> - 72PM<BR> - 72RX<BR> - -<BR> - 72PX<BR> - 72P<BR> - 72RXW<BR> - 72RXL<BR> - 72X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - T7YB<BR> - T7YA<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - TXD<BR> - TYA<BR> - TYP<BR> - -<BR> - TYD<BR> - TX<BR> - -<BR> - 150SX<BR> - 100SX<BR> - 102T<BR> - 101S<BR> - 190T<BR> - 150TX<BR> - 101<BR> - -<BR> - -<BR> - 101SX<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - ET6P<BR> - ET6S<BR> - ET6X<BR> - RJ-6W/8014EMW<BR> - RJ-6P/8014EMP<BR> - RJ-6X/8014EMX<BR> - TM7W<BR> - TM7P<BR> - TM7X<BR> - -<BR> - 8017SMS<BR> - -<BR> - 8017SMB<BR> - 8017SMA<BR> - -<BR> - -<BR> - CT-6W<BR> - CT-6H<BR> - CT-6P<BR> - CT-6R<BR> - -<BR> - CT-6V<BR> - CT-6X<BR> - -<BR> - -<BR> - 8038EKV<BR> - -<BR> - 8038EKX<BR> - -<BR> - -<BR> - 8038EKP<BR> - 8038EKZ<BR> - 8038EKW<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - 3321H<BR> - 3321P<BR> - 3321N<BR> - 1102H<BR> - 1102P<BR> - 1102T<BR> - RVA0911V304A<BR> - -<BR> - RVA0911H413A<BR> - RVG0707V100A<BR> - RVA0607V(H)306A<BR> - RVA1214H213A<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 3104B<BR> - 3104C<BR> - 3104F<BR> - 3104H<BR> - -<BR> - 3104M<BR> - 3104P<BR> - 3104S<BR> - 3104W<BR> - 3104X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - EVMQ0G<BR> - EVMQIG<BR> - EVMQ3G<BR> - EVMS0G<BR> - EVMQ0G<BR> - EVMG0G<BR> - -<BR> - -<BR> - -<BR> - EVMK4GA00B<BR> - EVM30GA00B<BR> - EVMK0GA00B<BR> - EVM38GA00B<BR> - EVMB6<BR> - EVLQ0<BR> - -<BR> - EVMMSG<BR> - EVMMBG<BR> - EVMMAG<BR> - -<BR> - -<BR> - EVMMCS<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - EVMM1<BR> - -<BR> - -<BR> - EVMM0<BR> - -<BR> - -<BR> - EVMM3<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - 62-3-1<BR> - 62-1-2<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 67R<BR> - -<BR> - 67P<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 67X<BR> - 63V<BR> - 63S<BR> - 63M<BR> - -<BR> - -<BR> - 63H<BR> - 63P<BR> - -<BR> - -<BR> - 63X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - RJ/RJR50<BR> - RJ/RJR50<BR> - RJ/RJR50<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - </TR> -</TABLE> -<P>&nbsp;<P> -<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> - <TR> - <TD COLSPAN=7> - <FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT> - <P> - <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT> - </TD> - </TR> - <TR> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> - </TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 3224G<BR> - 3224J<BR> - 3224W<BR> - 3269P<BR> - 3269W<BR> - 3269X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 44G<BR> - 44J<BR> - 44W<BR> - 84P<BR> - 84W<BR> - 84X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - ST63Z<BR> - ST63Y<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - ST5P<BR> - ST5W<BR> - ST5X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - </TR> - <TR> - <TD COLSPAN=7>&nbsp; - </TD> - </TR> - <TR> - <TD COLSPAN=7> - <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> - </TD> - </TR> - <TR> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> - </TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 3314G<BR> - 3314J<BR> - 3364A/B<BR> - 3364C/D<BR> - 3364W/X<BR> - 3313G<BR> - 3313J<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 23B<BR> - 23A<BR> - 21X<BR> - 21W<BR> - -<BR> - 22B<BR> - 22A<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - ST5YL/ST53YL<BR> - ST5YJ/5T53YJ<BR> - ST-23A<BR> - ST-22B<BR> - ST-22<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - ST-4B<BR> - ST-4A<BR> - -<BR> - -<BR> - -<BR> - ST-3B<BR> - ST-3A<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - EVM-6YS<BR> - EVM-1E<BR> - EVM-1G<BR> - EVM-1D<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - G4B<BR> - G4A<BR> - TR04-3S1<BR> - TRG04-2S1<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - DVR-43A<BR> - CVR-42C<BR> - CVR-42A/C<BR> - -<BR> - -<BR></FONT> - </TD> - </TR> -</TABLE> -<P> -<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT> -<P> - -&nbsp; -<P> -</td> -</tr> -</table> - - -Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf - - ->NAME ->VALUE - - - - - - - - -Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf - - - - - - - -<h3>SparkFun LEDs</h3> -This library contains discrete LEDs for illumination or indication, but no displays. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - -<B>LED 0603 SMT</B><p> -0603, surface mount. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch:0.075inch </li> -<li>Area: 0.06" x 0.03"</li> -</ul></p> -<p>Example device(s): -<ul><li>LED - BLUE</li> - - ->NAME ->VALUE - - - - - - - - - -LED 0603 SMT -0603, surface mount. -Specifications: -Pin count: 2 -Pin pitch:0.075inch -Area: 0.06" x 0.03" - -Example device(s): -LED - BLUE - - - - - - - - - -<b>SOT23-5</b> Zetex<p> -Source: http://www.zetex.com/3.0/pdf/ZXSC300.pdf - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -Upverter Parts Library - -Created by Upverter.com - - -TI-BQ24072TRGT16-1700X1700TP - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -ESD Suppressor TVS 3kV 2-Pin CLP T/R - - - - - - - - ->NAME - - - - - - -<h3>SparkFun Capacitors</h3> -This library contains capacitors. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - -<p><b>Generic 1608 (0603) package</b></p> -<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> - - - - - - - - ->NAME ->VALUE - - - - - - - -Generic 1608 (0603) package -0.2mm courtyard excess rounded to nearest 0.05mm. - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -LED, Cool White, SMD, 2.7mm x 2mm, 20 mA, 3.2 V, 3.55 cd - - - - - - - - - - ->NAME - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -Red, Green, Blue (RGB) - LED Indication - Discrete 1.9V Red, 2.9V Green, 2.9V Blue 0404 (1010 Metric) - - - - - - - - - - ->NAME - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -IC AUTHENTICATION CHIP 8SOIC - - - - - - - - - - ->NAME - - - - - - - - - - - - - -<h3>SparkFun Sensors</h3> -This library contains sensors- accelerometers, gyros, compasses, magnetometers, light sensors, imagers, temp sensors, etc. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - - - - - - ->Name ->Value - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>EAGLE Design Rules</b> -<p> -Die Standard-Design-Rules sind so gewählt, dass sie für -die meisten Anwendungen passen. Sollte ihre Platine -besondere Anforderungen haben, treffen Sie die erforderlichen -Einstellungen hier und speichern die Design Rules unter -einem neuen Namen ab. -<b>EAGLE Design Rules</b> -<p> -The default Design Rules have been set to cover -a wide range of applications. Your particular design -may have different requirements, so please make the -necessary adjustments and save your customized -design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Since Version 6.2.2 text objects can contain more than one line, -which will not be processed correctly with this version. - - -Since Version 8.2, EAGLE supports online libraries. The ids -of those online libraries will not be understood (or retained) -with this version. - - -Since Version 8.3, EAGLE supports URNs for individual library -assets (packages, symbols, and devices). The URNs of those assets -will not be understood (or retained) with this version. - - -Since Version 8.3, EAGLE supports the association of 3D packages -with devices in libraries, schematics, and board files. Those 3D -packages will not be understood (or retained) with this version. - - - diff --git a/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.pdf b/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.pdf deleted file mode 100644 index 018c10c..0000000 Binary files a/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.pdf and /dev/null differ diff --git a/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.sch b/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.sch deleted file mode 100644 index c4e4e4b..0000000 --- a/pcb_boven/openmv/openmv-boards-master/openmv4/pro/pro-base.sch +++ /dev/null @@ -1,19724 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->Name ->Value - - - - - - - - - ->Name ->Value - - - - - - - - ->Name ->Value - - -<b>CAPACITOR</b><p> -chip - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - ->Name ->Value - - - - - - - - - - - - ->Name ->Value - - - - - - - - - - ->NAME ->VALUE - - -CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - ->Name ->Value - - -<b>CAPACITOR</b><p> -chip - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -1/6W Thru-hole Resistor - *UNPROVEN* - - - - - - ->NAME ->VALUE - - -1/4W Resistor, 0.4" wide<p> - -Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> - - - - - - ->Name ->Value - - -1/2W Resistor, 0.5" wide<p> - -Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> - - - - - - ->Name ->Value - - -1W Resistor, 0.6" wide<p> - -Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> - - - - - - ->Name ->Value - - -2W Resistor, 0.8" wide<p> - -Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> - - - - - - ->Name ->Value - - - - - - - - - - ->Name ->Value - - - - - - - - - - ->Name ->Value - - -<b>CAPACITOR</b><p> -chip - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1007 (2518 metric) package - - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->Name ->Value - - - - - - - - - - - - -1.3x1.3mm 1.7mm between. Fits Sumida CDRH2D09, CDRH2D18 inductor - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<B>LED</B><p> -3 mm, round - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - -L -S - - -<h3>LED 3MM - No Silk</h3> -3 mm, round - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - -<b>TO 92</b> - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<B>LED</B><p> -5 mm, round - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - ->Name ->Value - - -<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b> - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - -<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b> - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package G</b> - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - ->Value ->Name - - - - - - ->Name ->Value - - - - - - ->Value ->Name - - - - - - ->Value ->Name - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - ->Name ->Value - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b><p> -chip - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->Name ->Value - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - ->Name ->Value - - -<B>Diode</B><p> -Basic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140 - - - - - - - - - ->NAME ->VALUE - - -<b>Diode</b><p> -Basic small signal diode good up to 200mA. SMB footprint. Common part #: BAS16 - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - ->NAME ->VALUE - - - - - - ->VALUE - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -D -S -G - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -D -S -G - - - - - - - - - ->NAME ->VALUE - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - -<b>Capacitor</b> -Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Resistor</b> -Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Inductors</b> -Basic Inductor/Choke - 0603 and 1206. Footprints are not proven and vary greatly between part numbers. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>LEDs</b> -Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Capacitor Polarized</b> -These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in electrolytic and tantalum varieties. Always verify the external diameter of the through hole cap, it varies with capacity, voltage, and manufacturer. The EIA devices should be standard. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Diode</b> -These are standard reverse protection diodes and small signal diodes. SMA package can handle up to about 1A. SOD-323 can handle about 200mA. What the SOD-323 package when ordering, there are some mfgs out there that are 5-pin packages. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->VALUE - - - - ->VALUE - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - - - - - - - - - - ->VALUE - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - - - -<b>Supply Symbols</b><p> - GND, VCC, 0V, +5V, -5V, etc.<p> - Please keep in mind, that these devices are necessary for the - automatic wiring of the supply signals.<p> - The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> - In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> - <author>Created by librarian@cadsoft.de</author> - - - - - - ->VALUE - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - - - -<b>Mounting Holes and Pads</b><p> -<author>Created by librarian@cadsoft.de</author> - - -<b>MOUNTING PAD</b> 2.8 mm, round - - - - - - - - - - - - - -<b>MOUNTING PAD</b> 3.0 mm, round - - - - - - - - - -3,0 - - -<b>MOUNTING PAD</b> 3.2 mm, round - - - - - - - - - -3,2 - - -<b>MOUNTING PAD</b> 3.3 mm, round - - - - - - - - - - - -<b>MOUNTING PAD</b> 3.6 mm, round - - - - - - - - - - - -<b>MOUNTING PAD</b> 4.1 mm, round - - - - - - - - - -<b>MOUNTING PAD</b> 4.3 mm, round - - - - - - - - - - - -<b>MOUNTING PAD</b> 4.5 mm, round - - - - - - - - - - - -<b>MOUNTING PAD</b> 5.0 mm, round - - - - - - - - - - - -<b>MOUNTING PAD</b> 5.5 mm, round - - - - - - - - - - - - - -MOUNTING PAD 2.8 mm, round - - - - - -MOUNTING PAD 3.0 mm, round - - - - - -MOUNTING PAD 3.2 mm, round - - - - - -MOUNTING PAD 3.3 mm, round - - - - - -MOUNTING PAD 3.6 mm, round - - - - - -MOUNTING PAD 4.1 mm, round - - - - - -MOUNTING PAD 4.3 mm, round - - - - - -MOUNTING PAD 4.5 mm, round - - - - - -MOUNTING PAD 5.0 mm, round - - - - - -MOUNTING PAD 5.5 mm, round - - - - - - - - - - - - ->NAME ->VALUE - - - - - -<b>MOUNTING PAD</b>, round - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->VALUE - - - - - - ->VALUE - - - ->VALUE - - - - - ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME - - - - ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2-Pin JST PH Series Right-Angle Connector (+/- for batteries) - - - - - - - - - - - - - - - - - - - - - ->Name ->Value -+ -- - - -4UCon #01528 -http://www.4uconnector.com/online/object/4udrawing/01528.pdf - - - - - - - - - - ->NAME -+ -- - - -<b>S2B-PH-K-S</b> -<p> -JST PH 2-pin thru-home side entry - - - - - - - - - - - - - - ->NAME -+ -- - - - - - - - - - - - - - - - ->Name ->Value -+ -- - - - - - - - - ->NAME ->VALUE - - - - - - -<b>JST 2-Pin Connectors of various flavors</b> - -<ul> -<li>SMT-RA (S2B-PH-SM4) 4UConnector #17311</li> -<li>SMT (B2B-PH-SM4)</li> -<li>THM-RA (S2B-PH)</li> -<li>THM (B2B-PH)</li> -</ul> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME - - - - - - - - - - - ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Frames for Sheet and Layout</b> - - - - - - - - - - - - - - - - - - - - - - - - - - -Date: ->LAST_DATE_TIME -Sheet: ->SHEET -REV: -TITLE: -Document Number: ->DRAWING_NAME - - - - -<b>FRAME</b> C Size , 17 x 22 INCH, Landscape<p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - -Ic Flash 256mbit 104mhz 8wson <a href="https://pricing.snapeda.com/parts/W25Q256JVEIQ%20TR/Winbond/view-part?ref=eda">Check prices</a> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - ->NAME - - - - ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -IC TRANSCEIVER HALF 1/1 32QFN - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -IC TRANSCEIVER HALF 1/1 32QFN - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -IC TRANSCEIVER HALF 1/1 32QFN - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -IC TRANSCEIVER HALF 1/1 32QFN - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -IC TRANSCEIVER HALF 1/1 32QFN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME -USB3320C-EZK-TR - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -IC TRANSCEIVER HALF 1/1 32QFN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Broadcom Chipset for 802.11b/g/n + Bluetooth 4.1/EDR - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -20 ppm, Ultra-Low Power 32.768 kHz Quartz XTAL Replacement - - - - - - - - - - ->NAME - - - - - - - - - -20 ppm, Ultra-Low Power 32.768 kHz Quartz XTAL Replacement - - - - - - - - ->NAME -SIT1533AI-H4-DCC-32.768E - - - - - - - - -20 ppm, Ultra-Low Power 32.768 kHz Quartz XTAL Replacement - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<- EDGE OF PCB - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - -<- EDGE OF PCB ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7.05MM - - - - - - - - - - - - - - -USB PORT -Type C - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -D+ -D- -GND -RX1+ -RX1- -RX2+ -RX2- -SBU1 -SBU2 -SHLD -TX1+ -TX1- -TX2+ -TX2- -VBUS - - -CC1 -CC2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -2 Line Common Mode Choke Surface Mount DCR 4Ohm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - -2 Line Common Mode Choke Surface Mount DCR 4Ohm - - - - - - - - - - - - ->NAME -ECMF02-4CMX8 - - - - - - - - - - - - -2 Line Common Mode Choke Surface Mount DCR 4Ohm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -Conn Unshrouded Header HDR 10 POS 1.27mm Solder ST SMD Tube - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - -Conn Unshrouded Header HDR 10 POS 1.27mm Solder ST SMD Tube - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME -FTSH-105-01-F-DV - - - - - - - -Conn Unshrouded Header HDR 10 POS 1.27mm Solder ST SMD Tube - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME -FTSH-105-01-F-DV - - - - - - - - - -Conn Unshrouded Header HDR 10 POS 1.27mm Solder ST SMD Tube - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>SparkFun Power Symbols</h3> -This library contains power, ground, and voltage-supply symbols. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - - - -<h3>1.8V Voltage Supply</h3> - - - ->VALUE - - - - -<h3>1.8V Supply Symbol</h3> -<p>Power supply symbol for a specifically-stated 1.8V source.</p> - - - - - - - - - - - - - - -<h3>SparkFun Connectors</h3> -This library contains electrically-functional connectors. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - -<h3>Plated Through Hole</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Molex 2-Pin Plated Through-Hole</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3> -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 3.5mm/138mil</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>JST-Right Angle Male Header SMT</h3> -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 2mm</li> -</ul></p> -<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -<li>JST_2MM_MALE</li> -</ul></p> - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.15"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - ->NAME ->VALUE - - -<h3>JST-Vertical Male Header SMT </h3> -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 2mm</li> -</ul></p> -<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - ->Name ->Value - - -<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3> -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 5mm/197mil</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole - Locking Footprint</h3> -Holes are staggered by 0.005" from center to hold pins while soldering. -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3> -Holes are offset from center by 0.005" to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole - Long Pads with Locking Footprint</h3> -Pins are staggered by 0.005" from center to hold pins in place while soldering. -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3> -Holes are offset from center 0.005" to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 3.5mm/138mil</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole - Long Pads without Silk Outline</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - ->NAME ->VALUE - - -<h3>Plated Through Hole - No Silk Outline</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - ->NAME ->VALUE - - -<h3>JST 2 Pin Right Angle Plated Through Hole</h3> -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch:2mm</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - ->Name ->Value -+ -- - - - - - - - - - -<h3>Plated Through Hole - 0.1" holes</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.2"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - ->NAME ->VALUE - - -<h3>Pogo Pins Connector - No Silk Outline</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - ->NAME ->VALUE - - -<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3> -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 3.5mm/138mil</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3> -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. -<br> No silk outline of connector. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch:2mm</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - ->Name ->Value -+ -- - - -<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3> -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. -<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. -<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch:2mm</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - ->Name ->Value -+ -- - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3> -tDocu marks the spring arms -<p>Specifications: -<ul><li>Pin count: 4</li> -<li>Pin pitch: 0.1"</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - - -<h3>2 Pin Screw Terminal - 2.54mm</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - ->NAME ->VALUE - - -2 pin poke-home connector - -part number 2062-2P from STA - - - - - - - - - ->NAME ->VALUE - - - - - - ->NAME ->VALUE - - - - -<h3>Plated Through Hole -8 Pin</h3> -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole -8 Pin Locking Footprint</h3> -Holes are offset 0.005", to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole -8 Pin Locking Footprint with Long Pads</h3> -Holes are offset 0.005", to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole -8 Pin Long Pads</h3> -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Screw Terminal 3.5mm Pitch -8 Pin PTH</h3> -<p>Specifications: -<ul><li>Pin count: 8</li> -<li>Pin pitch: 3.5mm/138mil</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>SMD -8 Pin Vertical Female</h3> -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>SMD -8 Pin Vertical Female</h3> -Alternate pin configuration -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>SMD -8 Pin Vertical Female</h3> -Combined footprint configuration -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>JST Vertical Crimp Connect</h3> -<p>Specifications: -<ul><li>Pin count: 8</li> -<li>Pin pitch:1mm</li> -</ul></p> -<p><a href=”http://www.jst-mfg.com/product/pdf/eng/eSR.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>SMD -8 Pin Vertical Male</h3> -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole -8 Pin No Silk</h3> -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole -8 Pin Locking Footprint No Silk</h3> -Holes are offset 0.005", to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole -8 Pin Locking Female Headers</h3> -Holes are offset 0.005" to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -Plated Through Hole -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - - - - -Molex 2-Pin Plated Through-Hole -Specifications: -Pin count:2 -Pin pitch:0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -Screw Terminal 3.5mm Pitch - 2 Pin PTH -Specifications: -Pin count: 2 -Pin pitch: 3.5mm/138mil - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -JST-Right Angle Male Header SMT -Specifications: -Pin count: 2 -Pin pitch: 2mm - -Datasheet referenced for footprint -Example device(s): -CONN_02 -JST_2MM_MALE - - - - - - -Plated Through Hole -Specifications: -Pin count:2 -Pin pitch:0.15" - -Example device(s): -CONN_02 - - - - - - -JST-Vertical Male Header SMT -Specifications: -Pin count: 2 -Pin pitch: 2mm - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -Screw Terminal 5mm Pitch -2 Pin PTH -Specifications: -Pin count: 2 -Pin pitch: 5mm/197mil - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -Plated Through Hole - Locking Footprint -Holes are staggered by 0.005" from center to hold pins while soldering. -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - - - - -Molex 2-Pin Plated Through-Hole Locking Footprint -Holes are offset from center by 0.005" to hold pins in place during soldering. -Specifications: -Pin count:2 -Pin pitch:0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -Plated Through Hole - Long Pads with Locking Footprint -Pins are staggered by 0.005" from center to hold pins in place while soldering. -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - - - - -Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking -Holes are offset from center 0.005" to hold pins in place during soldering. -Specifications: -Pin count: 2 -Pin pitch: 3.5mm/138mil - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -Plated Through Hole - Long Pads without Silk Outline -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - - - - -Plated Through Hole - No Silk Outline -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - - - - -JST 2 Pin Right Angle Plated Through Hole -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. -Specifications: -Pin count: 2 -Pin pitch:2mm - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -Plated Through Hole - 0.1" holes -Specifications: -Pin count:2 -Pin pitch:0.2" - -Example device(s): -CONN_02 - - - - - - -Pogo Pins Connector - No Silk Outline -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - - - - -Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline -Specifications: -Pin count: 2 -Pin pitch: 3.5mm/138mil - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -JST 2 Pin Right Angle Plated Through Hole- No Silk -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. - No silk outline of connector. -Specifications: -Pin count: 2 -Pin pitch:2mm - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -JST 2 Pin Right Angle Plated Through Hole - KIT -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. - This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. - This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. -Specifications: -Pin count: 2 -Pin pitch:2mm - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -Spring Terminal- PCB Mount 2 Pin PTH -tDocu marks the spring arms -Specifications: -Pin count: 4 -Pin pitch: 0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - - - - -2 Pin Screw Terminal - 2.54mm -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - - - - -2 pin poke-home connector - -part number 2062-2P from STA - - - - - - - - - - -Plated Through Hole -8 Pin -Specifications: -Pin count:8 -Pin pitch:0.1" - -Example device(s): -CONN_08 - - - - - - -Plated Through Hole -8 Pin Locking Footprint -Holes are offset 0.005", to hold pins in place during soldering. -Specifications: -Pin count:8 -Pin pitch:0.1" - -Example device(s): -CONN_08 - - - - - - -Plated Through Hole -8 Pin Locking Footprint with Long Pads -Holes are offset 0.005", to hold pins in place during soldering. -Specifications: -Pin count:8 -Pin pitch:0.1" - -Example device(s): -CONN_08 - - - - - - -Plated Through Hole -8 Pin Long Pads -Specifications: -Pin count:8 -Pin pitch:0.1" - -Example device(s): -CONN_08 - - - - - - -Screw Terminal 3.5mm Pitch -8 Pin PTH -Specifications: -Pin count: 8 -Pin pitch: 3.5mm/138mil - -Datasheet referenced for footprint -Example device(s): -CONN_08 - - - - - - -SMD -8 Pin Vertical Female -Specifications: -Pin count:8 -Pin pitch:0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_08 - - - - - - -SMD -8 Pin Vertical Female -Alternate pin configuration -Specifications: -Pin count:8 -Pin pitch:0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_08 - - - - - - -SMD -8 Pin Vertical Female -Combined footprint configuration -Specifications: -Pin count:8 -Pin pitch:0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_08 - - - - - - -JST Vertical Crimp Connect -Specifications: -Pin count: 8 -Pin pitch:1mm - -Datasheet referenced for footprint -Example device(s): -CONN_08 - - - - - - -SMD -8 Pin Vertical Male -Specifications: -Pin count:8 -Pin pitch:0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_08 - - - - - - -Plated Through Hole -8 Pin No Silk -Specifications: -Pin count:8 -Pin pitch:0.1" - -Example device(s): -CONN_08 - - - - - - -Plated Through Hole -8 Pin Locking Footprint No Silk -Holes are offset 0.005", to hold pins in place during soldering. -Specifications: -Pin count:8 -Pin pitch:0.1" - -Example device(s): -CONN_08 - - - - - - -Plated Through Hole -8 Pin Locking Female Headers -Holes are offset 0.005" to hold pins in place during soldering. -Specifications: -Pin count:8 -Pin pitch:0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_08 - - - - - - - - -<h3>2 Pin Connection</h3> - - - - - - ->VALUE ->NAME - - - - -<h3> 8 Pin Connection</h3> - - - - - - - - - - - - ->VALUE ->NAME - - - - - - - - - - - - -<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> - -<p></p> -<b>On any of the 0.1 inch spaced packages, you can populate with these:</b> -<ul> -<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> -<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> -<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> -<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> -<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> -</ul> - -<p></p> -<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> -<ul> -<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> -</ul> - -<p></p> -<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> -<ul> -<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> -<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> -<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> -<p></p> -</ul> - -<p></p> -<b>Special notes:</b> - - Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br> - -2.54_SCREWTERM for use with PRT-10571.<br><br> - -3.5mm Screw Terminal footprints for PRT-08084<br><br> - -5mm Screw Terminal footprints for use with PRT-08432 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> - -<p></p> -<b>On any of the 0.1 inch spaced packages, you can populate with these:</b> -<ul> -<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> -<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> -<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> -<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> -<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> -<li><a href="https://www.sparkfun.com/products/9279"> Arduino Stackable Header - 8 Pin</a> (PRT-09279)</li> -</ul> - -<p></p> -<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> -<ul> -<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> -</ul> - -<p></p> -<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> -<ul> -<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> -<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> -<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> -<p></p> -</ul> - -<p></p> -<b>Special notes:</b> -<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 -<p></p> -NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... -This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - -iNEMO inertial module: 3D accelerometer and 3D gyroscope - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Resistors, Capacitors, Inductors</b><p> -Based on the previous libraries: -<ul> -<li>r.lbr -<li>cap.lbr -<li>cap-fe.lbr -<li>captant.lbr -<li>polcap.lbr -<li>ipc-smd.lbr -</ul> -All SMD packages are defined according to the IPC specifications and CECC<p> -<author>Created by librarian@cadsoft.de</author><p> -<p> -for Electrolyt Capacitors see also :<p> -www.bccomponents.com <p> -www.panasonic.com<p> -www.kemet.com<p> -http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b> -<p> -for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p> - -<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0> -<tr valign="top"> - -<! <td width="10">&nbsp;</td> -<td width="90%"> - -<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b> -<P> -<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> - <TR> - <TD COLSPAN=8> - <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT> - </TD> - </TR> - <TR> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">BI&nbsp;TECH</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT> - </B> - </TD> - <TD ALIGN=CENTER> - <B> - <FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT> - </B> - </TD><TD>&nbsp;</TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 > - 3005P<BR> - 3006P<BR> - 3006W<BR> - 3006Y<BR> - 3009P<BR> - 3009W<BR> - 3009Y<BR> - 3057J<BR> - 3057L<BR> - 3057P<BR> - 3057Y<BR> - 3059J<BR> - 3059L<BR> - 3059P<BR> - 3059Y<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 89P<BR> - 89W<BR> - 89X<BR> - 89PH<BR> - 76P<BR> - 89XH<BR> - 78SLT<BR> - 78L&nbsp;ALT<BR> - 56P&nbsp;ALT<BR> - 78P&nbsp;ALT<BR> - T8S<BR> - 78L<BR> - 56P<BR> - 78P<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - T18/784<BR> - 783<BR> - 781<BR> - -<BR> - -<BR> - -<BR> - 2199<BR> - 1697/1897<BR> - 1680/1880<BR> - 2187<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 8035EKP/CT20/RJ-20P<BR> - -<BR> - RJ-20X<BR> - -<BR> - -<BR> - -<BR> - 1211L<BR> - 8012EKQ&nbsp;ALT<BR> - 8012EKR&nbsp;ALT<BR> - 1211P<BR> - 8012EKJ<BR> - 8012EKL<BR> - 8012EKQ<BR> - 8012EKR<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 2101P<BR> - 2101W<BR> - 2101Y<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 2102L<BR> - 2102S<BR> - 2102Y<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - EVMCOG<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 43P<BR> - 43W<BR> - 43Y<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 40L<BR> - 40P<BR> - 40Y<BR> - 70Y-T602<BR> - 70L<BR> - 70P<BR> - 70Y<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - RT/RTR12<BR> - RT/RTR12<BR> - RT/RTR12<BR> - -<BR> - RJ/RJR12<BR> - RJ/RJR12<BR> - RJ/RJR12<BR></FONT> - </TD> - </TR> - <TR> - <TD COLSPAN=8>&nbsp; - </TD> - </TR> - <TR> - <TD COLSPAN=8> - <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT> - </TD> - </TR> - <TR> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> - </TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 3250L<BR> - 3250P<BR> - 3250W<BR> - 3250X<BR> - 3252P<BR> - 3252W<BR> - 3252X<BR> - 3260P<BR> - 3260W<BR> - 3260X<BR> - 3262P<BR> - 3262W<BR> - 3262X<BR> - 3266P<BR> - 3266W<BR> - 3266X<BR> - 3290H<BR> - 3290P<BR> - 3290W<BR> - 3292P<BR> - 3292W<BR> - 3292X<BR> - 3296P<BR> - 3296W<BR> - 3296X<BR> - 3296Y<BR> - 3296Z<BR> - 3299P<BR> - 3299W<BR> - 3299X<BR> - 3299Y<BR> - 3299Z<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - 66P&nbsp;ALT<BR> - 66W&nbsp;ALT<BR> - 66X&nbsp;ALT<BR> - 66P&nbsp;ALT<BR> - 66W&nbsp;ALT<BR> - 66X&nbsp;ALT<BR> - -<BR> - 64W&nbsp;ALT<BR> - -<BR> - 64P&nbsp;ALT<BR> - 64W&nbsp;ALT<BR> - 64X&nbsp;ALT<BR> - 64P<BR> - 64W<BR> - 64X<BR> - 66X&nbsp;ALT<BR> - 66P&nbsp;ALT<BR> - 66W&nbsp;ALT<BR> - 66P<BR> - 66W<BR> - 66X<BR> - 67P<BR> - 67W<BR> - 67X<BR> - 67Y<BR> - 67Z<BR> - 68P<BR> - 68W<BR> - 68X<BR> - 67Y&nbsp;ALT<BR> - 67Z&nbsp;ALT<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 5050<BR> - 5091<BR> - 5080<BR> - 5087<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - T63YB<BR> - T63XB<BR> - -<BR> - -<BR> - -<BR> - 5887<BR> - 5891<BR> - 5880<BR> - -<BR> - -<BR> - -<BR> - T93Z<BR> - T93YA<BR> - T93XA<BR> - T93YB<BR> - T93XB<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 8026EKP<BR> - 8026EKW<BR> - 8026EKM<BR> - 8026EKP<BR> - 8026EKB<BR> - 8026EKM<BR> - 1309X<BR> - 1309P<BR> - 1309W<BR> - 8024EKP<BR> - 8024EKW<BR> - 8024EKN<BR> - RJ-9P/CT9P<BR> - RJ-9W<BR> - RJ-9X<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 3103P<BR> - 3103Y<BR> - 3103Z<BR> - 3103P<BR> - 3103Y<BR> - 3103Z<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 3105P/3106P<BR> - 3105W/3106W<BR> - 3105X/3106X<BR> - 3105Y/3106Y<BR> - 3105Z/3105Z<BR> - 3102P<BR> - 3102W<BR> - 3102X<BR> - 3102Y<BR> - 3102Z<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - EVMCBG<BR> - EVMCCG<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 55-1-X<BR> - 55-4-X<BR> - 55-3-X<BR> - 55-2-X<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 50-2-X<BR> - 50-4-X<BR> - 50-3-X<BR> - -<BR> - -<BR> - -<BR> - 64P<BR> - 64W<BR> - 64X<BR> - 64Y<BR> - 64Z<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - RT/RTR22<BR> - RT/RTR22<BR> - RT/RTR22<BR> - RT/RTR22<BR> - RJ/RJR22<BR> - RJ/RJR22<BR> - RJ/RJR22<BR> - RT/RTR26<BR> - RT/RTR26<BR> - RT/RTR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RJ/RJR26<BR> - RT/RTR24<BR> - RT/RTR24<BR> - RT/RTR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - RJ/RJR24<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - </TR> - <TR> - <TD COLSPAN=8>&nbsp; - </TD> - </TR> - <TR> - <TD COLSPAN=8> - <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> - </TD> - </TR> - <TR> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> - </TD> - <TD ALIGN=CENTER> - <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> - </TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 3323P<BR> - 3323S<BR> - 3323W<BR> - 3329H<BR> - 3329P<BR> - 3329W<BR> - 3339H<BR> - 3339P<BR> - 3339W<BR> - 3352E<BR> - 3352H<BR> - 3352K<BR> - 3352P<BR> - 3352T<BR> - 3352V<BR> - 3352W<BR> - 3362H<BR> - 3362M<BR> - 3362P<BR> - 3362R<BR> - 3362S<BR> - 3362U<BR> - 3362W<BR> - 3362X<BR> - 3386B<BR> - 3386C<BR> - 3386F<BR> - 3386H<BR> - 3386K<BR> - 3386M<BR> - 3386P<BR> - 3386S<BR> - 3386W<BR> - 3386X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 25P<BR> - 25S<BR> - 25RX<BR> - 82P<BR> - 82M<BR> - 82PA<BR> - -<BR> - -<BR> - -<BR> - 91E<BR> - 91X<BR> - 91T<BR> - 91B<BR> - 91A<BR> - 91V<BR> - 91W<BR> - 25W<BR> - 25V<BR> - 25P<BR> - -<BR> - 25S<BR> - 25U<BR> - 25RX<BR> - 25X<BR> - 72XW<BR> - 72XL<BR> - 72PM<BR> - 72RX<BR> - -<BR> - 72PX<BR> - 72P<BR> - 72RXW<BR> - 72RXL<BR> - 72X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - T7YB<BR> - T7YA<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - TXD<BR> - TYA<BR> - TYP<BR> - -<BR> - TYD<BR> - TX<BR> - -<BR> - 150SX<BR> - 100SX<BR> - 102T<BR> - 101S<BR> - 190T<BR> - 150TX<BR> - 101<BR> - -<BR> - -<BR> - 101SX<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - ET6P<BR> - ET6S<BR> - ET6X<BR> - RJ-6W/8014EMW<BR> - RJ-6P/8014EMP<BR> - RJ-6X/8014EMX<BR> - TM7W<BR> - TM7P<BR> - TM7X<BR> - -<BR> - 8017SMS<BR> - -<BR> - 8017SMB<BR> - 8017SMA<BR> - -<BR> - -<BR> - CT-6W<BR> - CT-6H<BR> - CT-6P<BR> - CT-6R<BR> - -<BR> - CT-6V<BR> - CT-6X<BR> - -<BR> - -<BR> - 8038EKV<BR> - -<BR> - 8038EKX<BR> - -<BR> - -<BR> - 8038EKP<BR> - 8038EKZ<BR> - 8038EKW<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - 3321H<BR> - 3321P<BR> - 3321N<BR> - 1102H<BR> - 1102P<BR> - 1102T<BR> - RVA0911V304A<BR> - -<BR> - RVA0911H413A<BR> - RVG0707V100A<BR> - RVA0607V(H)306A<BR> - RVA1214H213A<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 3104B<BR> - 3104C<BR> - 3104F<BR> - 3104H<BR> - -<BR> - 3104M<BR> - 3104P<BR> - 3104S<BR> - 3104W<BR> - 3104X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - EVMQ0G<BR> - EVMQIG<BR> - EVMQ3G<BR> - EVMS0G<BR> - EVMQ0G<BR> - EVMG0G<BR> - -<BR> - -<BR> - -<BR> - EVMK4GA00B<BR> - EVM30GA00B<BR> - EVMK0GA00B<BR> - EVM38GA00B<BR> - EVMB6<BR> - EVLQ0<BR> - -<BR> - EVMMSG<BR> - EVMMBG<BR> - EVMMAG<BR> - -<BR> - -<BR> - EVMMCS<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - EVMM1<BR> - -<BR> - -<BR> - EVMM0<BR> - -<BR> - -<BR> - EVMM3<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - 62-3-1<BR> - 62-1-2<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 67R<BR> - -<BR> - 67P<BR> - -<BR> - -<BR> - -<BR> - -<BR> - 67X<BR> - 63V<BR> - 63S<BR> - 63M<BR> - -<BR> - -<BR> - 63H<BR> - 63P<BR> - -<BR> - -<BR> - 63X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - RJ/RJR50<BR> - RJ/RJR50<BR> - RJ/RJR50<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - </TR> -</TABLE> -<P>&nbsp;<P> -<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> - <TR> - <TD COLSPAN=7> - <FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT> - <P> - <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT> - </TD> - </TR> - <TR> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> - </TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 3224G<BR> - 3224J<BR> - 3224W<BR> - 3269P<BR> - 3269W<BR> - 3269X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 44G<BR> - 44J<BR> - 44W<BR> - 84P<BR> - 84W<BR> - 84X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - ST63Z<BR> - ST63Y<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - ST5P<BR> - ST5W<BR> - ST5X<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - </TR> - <TR> - <TD COLSPAN=7>&nbsp; - </TD> - </TR> - <TR> - <TD COLSPAN=7> - <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> - </TD> - </TR> - <TR> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> - </TD> - <TD> - <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> - </TD> - </TR> - <TR> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 3314G<BR> - 3314J<BR> - 3364A/B<BR> - 3364C/D<BR> - 3364W/X<BR> - 3313G<BR> - 3313J<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - 23B<BR> - 23A<BR> - 21X<BR> - 21W<BR> - -<BR> - 22B<BR> - 22A<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - ST5YL/ST53YL<BR> - ST5YJ/5T53YJ<BR> - ST-23A<BR> - ST-22B<BR> - ST-22<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - ST-4B<BR> - ST-4A<BR> - -<BR> - -<BR> - -<BR> - ST-3B<BR> - ST-3A<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - EVM-6YS<BR> - EVM-1E<BR> - EVM-1G<BR> - EVM-1D<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - G4B<BR> - G4A<BR> - TR04-3S1<BR> - TRG04-2S1<BR> - -<BR> - -<BR> - -<BR></FONT> - </TD> - <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> - -<BR> - -<BR> - DVR-43A<BR> - CVR-42C<BR> - CVR-42A/C<BR> - -<BR> - -<BR></FONT> - </TD> - </TR> -</TABLE> -<P> -<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT> -<P> - -&nbsp; -<P> -</td> -</tr> -</table> - - -Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf - - ->NAME ->VALUE - - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b><p> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b> - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b><p> -grid 2.5 mm, outline 2.4 x 4.4 mm - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 mm, outline 2.5 x 5 mm - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 mm, outline 3 x 5 mm - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 mm, outline 4 x 5 mm - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 mm, outline 5 x 5 mm - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 mm, outline 6 x 5 mm - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 mm + 5 mm, outline 2.4 x 7 mm - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 + 5 mm, outline 2.5 x 7.5 mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 + 5 mm, outline 3.5 x 7.5 mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 + 5 mm, outline 4.5 x 7.5 mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 2.5 + 5 mm, outline 5.5 x 7.5 mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 5 mm, outline 2.4 x 4.4 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -<b>CAPACITOR</b><p> -grid 5 mm, outline 2.5 x 7.5 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 5 mm, outline 4.5 x 7.5 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 5 mm, outline 3 x 7.5 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 5 mm, outline 5 x 7.5 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 5 mm, outline 5.5 x 7.5 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 5 mm, outline 7.5 x 7.5 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -Horizontal, grid 5 mm, outline 7.5 x 7.5 mm - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -<b>CAPACITOR</b><p> -grid 7.5 mm, outline 3.2 x 10.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 7.5 mm, outline 4.2 x 10.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 7.5 mm, outline 5.2 x 10.6 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 10.2 mm, outline 4.3 x 13.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 10.2 mm, outline 5.4 x 13.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 10.2 mm, outline 6.4 x 13.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 15 mm, outline 5.4 x 18.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 15 mm, outline 6.4 x 18.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 15 mm, outline 7.2 x 18.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 15 mm, outline 8.4 x 18.3 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 15 mm, outline 9.1 x 18.2 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 22.5 mm, outline 6.2 x 26.8 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 22.5 mm, outline 7.4 x 26.8 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 22.5 mm, outline 8.7 x 26.8 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 22.5 mm, outline 10.8 x 26.8 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 22.5 mm, outline 11.3 x 26.8 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 27.5 mm, outline 9.3 x 31.6 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 27.5 mm, outline 11.3 x 31.6 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 27.5 mm, outline 13.4 x 31.6 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 27.5 mm, outline 20.5 x 31.6 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 32.5 mm, outline 13.7 x 37.4 mm - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 32.5 mm, outline 16.2 x 37.4 mm - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 32.5 mm, outline 18.2 x 37.4 mm - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 37.5 mm, outline 19.2 x 41.8 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 37.5 mm, outline 20.3 x 41.8 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 5 mm, outline 3.5 x 7.5 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 37.5 mm, outline 15.5 x 41.8 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 7.5 mm, outline 6.3 x 10.6 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 27.5 mm, outline 15.4 x 31.6 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>CAPACITOR</b><p> -grid 27.5 mm, outline 17.3 x 31.6 mm - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p> -Metric Code Size 1005 - - - - ->NAME ->VALUE - - - - -<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p> -Metric Code Size 1608 - - - - ->NAME ->VALUE - - - - -<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p> -Metric Code Size 2012 - - - - ->NAME ->VALUE - - - - -<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p> -Metric Code Size 3216 - - - - ->NAME ->VALUE - - - - -<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p> -Metric Code Size 3225 - - - - ->NAME ->VALUE - - - - -<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p> -Metric Code Size 4532 - - - - ->NAME ->VALUE - - - - -<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p> -Metric Code Size 4564 - - - - ->NAME ->VALUE - - - - -<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650 - - - - ->NAME ->VALUE - - - - -<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664 - - - - ->NAME ->VALUE - - - - -<b> </b><p> -Source: http://www.vishay.com/docs/10129/hpc0201a.pdf - - ->NAME ->VALUE - - - -<b>CAPACITOR</b><p> -Source: AVX .. aphvc.pdf - - - - ->NAME ->VALUE - - - - -<b>CAPACITOR</b><p> -Source: AVX .. aphvc.pdf - - - - ->NAME ->VALUE - - - - -<b>CAPACITOR</b> - - - - - - - ->NAME ->VALUE - - - - -Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf - - - - - -Chip, 1.00 X 0.50 X 0.60 mm body -<p>Chip package with body size 1.00 X 0.50 X 0.60 mm</p> - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR - - - - - -CAPACITOR -grid 2.5 mm, outline 2.4 x 4.4 mm - - - - - -CAPACITOR -grid 2.5 mm, outline 2.5 x 5 mm - - - - - -CAPACITOR -grid 2.5 mm, outline 3 x 5 mm - - - - - -CAPACITOR -grid 2.5 mm, outline 4 x 5 mm - - - - - -CAPACITOR -grid 2.5 mm, outline 5 x 5 mm - - - - - -CAPACITOR -grid 2.5 mm, outline 6 x 5 mm - - - - - -CAPACITOR -grid 2.5 mm + 5 mm, outline 2.4 x 7 mm - - - - - -CAPACITOR -grid 2.5 + 5 mm, outline 2.5 x 7.5 mm - - - - - -CAPACITOR -grid 2.5 + 5 mm, outline 3.5 x 7.5 mm - - - - - -CAPACITOR -grid 2.5 + 5 mm, outline 4.5 x 7.5 mm - - - - - -CAPACITOR -grid 2.5 + 5 mm, outline 5.5 x 7.5 mm - - - - - -CAPACITOR -grid 5 mm, outline 2.4 x 4.4 mm - - - - - -CAPACITOR -grid 5 mm, outline 2.5 x 7.5 mm - - - - - -CAPACITOR -grid 5 mm, outline 4.5 x 7.5 mm - - - - - -CAPACITOR -grid 5 mm, outline 3 x 7.5 mm - - - - - -CAPACITOR -grid 5 mm, outline 5 x 7.5 mm - - - - - -CAPACITOR -grid 5 mm, outline 5.5 x 7.5 mm - - - - - -CAPACITOR -grid 5 mm, outline 7.5 x 7.5 mm - - - - - -CAPACITOR -Horizontal, grid 5 mm, outline 7.5 x 7.5 mm - - - - - -CAPACITOR -grid 7.5 mm, outline 3.2 x 10.3 mm - - - - - -CAPACITOR -grid 7.5 mm, outline 4.2 x 10.3 mm - - - - - -CAPACITOR -grid 7.5 mm, outline 5.2 x 10.6 mm - - - - - -CAPACITOR -grid 10.2 mm, outline 4.3 x 13.3 mm - - - - - -CAPACITOR -grid 10.2 mm, outline 5.4 x 13.3 mm - - - - - -CAPACITOR -grid 10.2 mm, outline 6.4 x 13.3 mm - - - - - -CAPACITOR -grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm - - - - - -CAPACITOR -grid 15 mm, outline 5.4 x 18.3 mm - - - - - -CAPACITOR -grid 15 mm, outline 6.4 x 18.3 mm - - - - - -CAPACITOR -grid 15 mm, outline 7.2 x 18.3 mm - - - - - -CAPACITOR -grid 15 mm, outline 8.4 x 18.3 mm - - - - - -CAPACITOR -grid 15 mm, outline 9.1 x 18.2 mm - - - - - -CAPACITOR -grid 22.5 mm, outline 6.2 x 26.8 mm - - - - - -CAPACITOR -grid 22.5 mm, outline 7.4 x 26.8 mm - - - - - -CAPACITOR -grid 22.5 mm, outline 8.7 x 26.8 mm - - - - - -CAPACITOR -grid 22.5 mm, outline 10.8 x 26.8 mm - - - - - -CAPACITOR -grid 22.5 mm, outline 11.3 x 26.8 mm - - - - - -CAPACITOR -grid 27.5 mm, outline 9.3 x 31.6 mm - - - - - -CAPACITOR -grid 27.5 mm, outline 11.3 x 31.6 mm - - - - - -CAPACITOR -grid 27.5 mm, outline 13.4 x 31.6 mm - - - - - -CAPACITOR -grid 27.5 mm, outline 20.5 x 31.6 mm - - - - - -CAPACITOR -grid 32.5 mm, outline 13.7 x 37.4 mm - - - - - -CAPACITOR -grid 32.5 mm, outline 16.2 x 37.4 mm - - - - - -CAPACITOR -grid 32.5 mm, outline 18.2 x 37.4 mm - - - - - -CAPACITOR -grid 37.5 mm, outline 19.2 x 41.8 mm - - - - - -CAPACITOR -grid 37.5 mm, outline 20.3 x 41.8 mm - - - - - -CAPACITOR -grid 5 mm, outline 3.5 x 7.5 mm - - - - - -CAPACITOR -grid 37.5 mm, outline 15.5 x 41.8 mm - - - - - -CAPACITOR -grid 7.5 mm, outline 6.3 x 10.6 mm - - - - - -CAPACITOR -grid 27.5 mm, outline 15.4 x 31.6 mm - - - - - -CAPACITOR -grid 27.5 mm, outline 17.3 x 31.6 mm - - - - - -Ceramic Chip Capacitor KEMET 0204 reflow solder -Metric Code Size 1005 - - - - - -Ceramic Chip Capacitor KEMET 0603 reflow solder -Metric Code Size 1608 - - - - - -Ceramic Chip Capacitor KEMET 0805 reflow solder -Metric Code Size 2012 - - - - - -Ceramic Chip Capacitor KEMET 1206 reflow solder -Metric Code Size 3216 - - - - - -Ceramic Chip Capacitor KEMET 1210 reflow solder -Metric Code Size 3225 - - - - - -Ceramic Chip Capacitor KEMET 1812 reflow solder -Metric Code Size 4532 - - - - - -Ceramic Chip Capacitor KEMET 1825 reflow solder -Metric Code Size 4564 - - - - - -Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650 - - - - - -Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664 - - - - - - -Source: http://www.vishay.com/docs/10129/hpc0201a.pdf - - - - - -CAPACITOR -Source: AVX .. aphvc.pdf - - - - - -CAPACITOR -Source: AVX .. aphvc.pdf - - - - - -CAPACITOR - - - - - - - - - ->NAME ->VALUE - - - - - - - - -<B>CAPACITOR</B>, European symbol - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>SparkFun LEDs</h3> -This library contains discrete LEDs for illumination or indication, but no displays. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - -<B>LED 0603 SMT</B><p> -0603, surface mount. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch:0.075inch </li> -<li>Area: 0.06" x 0.03"</li> -</ul></p> -<p>Example device(s): -<ul><li>LED - BLUE</li> - - ->NAME ->VALUE - - - - - - - -<h3>LED 1206 SMT</h3> - -1206, surface mount. - -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: </li> -<li>Area: 0.125" x 0.06"</li> -</ul></p> -<p>Example device(s): -<ul><li>LED</li></ul> - - - - - - ->NAME ->VALUE - - -<h3>LED 1206 SMT</h3> - -1206, surface mount. - -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Area: 0.125" x 0.06"</li> -</ul></p> -<p>Example device(s): -<ul><li>LED</li></ul> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -LED 0603 SMT -0603, surface mount. -Specifications: -Pin count: 2 -Pin pitch:0.075inch -Area: 0.06" x 0.03" - -Example device(s): -LED - BLUE - - - - - -LED 1206 SMT - -1206, surface mount. - -Specifications: -Pin count: 2 -Pin pitch: -Area: 0.125" x 0.06" - -Example device(s): -LED - - - - - -LED 1206 SMT - -1206, surface mount. - -Specifications: -Pin count: 2 -Area: 0.125" x 0.06" - -Example device(s): -LED - - - - - - - -<h3>LED</h3> -<p></p> - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - -<h3>Red SMD LED</h3> -<p>Used in manufacturing of most products at SparkFun</p> - -<p><b>Packages:</b> -<ul><li><b>0603</b> - SMD 0603 package <a href="http://docs.avagotech.com/docs/AV02-0551EN">[Product Link]</li> -<li><b>0603 SMART</b> - SMD 0603 SMART package ( more efficient and expensive)<a href="http://www.osram-os.com/Graphics/XPic2/00077099_0.pdf">[Product Link]</li> -<li><b> 1206</b> - SMD1206 package <a href="https://www.sparkfun.com/datasheets/DevTools/LilyPad/Q150OVS4.pdff">[Product Link]</li> -<ul></p> - -<p><b>SparkFun Products:</b> -<ul><li><a href=”https://www.sparkfun.com/products/821”>Pro Mini 328 -5V</a></li> -<li><a href=”https://www.sparkfun.com/products/12757”>RedBoard</a></li> -<li><a href=”https://www.sparkfun.com/products/13613”>IOIO-OTG</a></li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>Green SMD LED</h3> -<p>Used in manufacturing of various products at SparkFun</p> - -<p><b>Packages:</b> -<ul><li><b>0603</b> - SMD 0603 package <a href="http://www.futureelectronics.com/en/technologies/semiconductors/optoelectronics/leds/Pages/9894312-LTST-C190GKT.aspx?CrossPart=HSMG-C190&IM=0">[Product Link]</li> -<li><b>LilyPad 1206</b> - SMD1206 LilyPad package <a href="http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=IN150NGHARVATEKCORPORATION2049943&IM=0">[Product Link]</li> -<li><b> 1206</b> - SMD1206 package <a href=http://www.futureelectronics.com/en/technologies/semiconductors/optoelectronics/leds/Pages/8315665-LTST-C150KGKT.aspx?IM=0">[Product Link]</li> -<li><b> 1206 Bottom Mount</b> -SMD 1206 Bottom Mount <a href=http://www.digikey.com/product-detail/en/lite-on-inc/LTST-C230KGKT/160-1456-1-ND/386854">[Product Link]</li> -<ul></p> - -<p><b>SparkFun Products:</b> -<ul><li><a href=”https://www.sparkfun.com/products/821”>Pro Mini 328 -5V</a></li> -<li><a href=”https://www.sparkfun.com/products/12757”>RedBoard</a></li> -<li><a href=”https://www.sparkfun.com/products/13720”>MP3 Trigger</a></li> -<li><a href=”https://www.sparkfun.com/products/11076”>Makey Makey</a></li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Supply Symbols</b><p> - GND, VCC, 0V, +5V, -5V, etc.<p> - Please keep in mind, that these devices are necessary for the - automatic wiring of the supply signals.<p> - The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> - In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> - <author>Created by librarian@cadsoft.de</author> - - - - - - ->VALUE - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - - - - - -<b>SOT23-5</b> Zetex<p> -Source: http://www.zetex.com/3.0/pdf/ZXSC300.pdf - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -ADP150 2.8V 150mA Analog Devices Linear LDO Regulator -ADP150AUJZ-2.8-R7 - - - - - - - - - ->Name ->Value - - - - -ADP150 2.8V 150mA Linear LDO Regulator Analog Devices -ADP150AUJZ-2.8-R7 - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -TI-BQ24072TRGT16-1700X1700TP - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -TI-BQ24072TRGT16-1700X1700TP - - - - - - - - - - - - - - - - - - - - - ->NAME -BQ24072TRGTR - - - - - - - - - - - - - - - - - - - - - -TI-BQ24072TRGT16-1700X1700TP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -ESD Suppressor TVS 3kV 2-Pin CLP T/R - - - - - - - - ->NAME - - - - - - -ESD Suppressor TVS 3kV 2-Pin CLP T/R - - - - - - - - - - - ->NAME -VCUT05E1-SD0-G4-08 - - - - - - -ESD Suppressor TVS 3kV 2-Pin CLP T/R - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>SparkFun Capacitors</h3> -This library contains capacitors. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - -<p><b>Generic 1608 (0603) package</b></p> -<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> - - - - - - - - ->NAME ->VALUE - - - - - -<p><b>Generic 3216 (1206) package</b></p> -<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> - - - - - - - - ->NAME ->VALUE - - - - - - - -Generic 1608 (0603) package -0.2mm courtyard excess rounded to nearest 0.05mm. - - - - - -Generic 3216 (1206) package -0.2mm courtyard excess rounded to nearest 0.05mm. - - - - - - - - - ->NAME ->VALUE - - - - - - - - -<h3>4.7µF ceramic capacitors</h3> -<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -LED, Cool White, SMD, 2.7mm x 2mm, 20 mA, 3.2 V, 3.55 cd - - - - - - - - - - ->NAME - - - - - - - -LED, Cool White, SMD, 2.7mm x 2mm, 20 mA, 3.2 V, 3.55 cd - - - - - - - - - - - - ->NAME -CLM3C-WKW-CWBYA453 - - - - - - -LED, Cool White, SMD, 2.7mm x 2mm, 20 mA, 3.2 V, 3.55 cd - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -Red, Green, Blue (RGB) - LED Indication - Discrete 1.9V Red, 2.9V Green, 2.9V Blue 0404 (1010 Metric) - - - - - - - - - - ->NAME - - - - - - - - - -Red, Green, Blue (RGB) - LED Indication - Discrete 1.9V Red, 2.9V Green, 2.9V Blue 0404 (1010 Metric) - - - - ->NAME -UHD1110-FKA-CL1A13R3Q1BBQFMF3 - - - - -BC -GC -RC - - - - -Red, Green, Blue (RGB) - LED Indication - Discrete 1.9V Red, 2.9V Green, 2.9V Blue 0404 (1010 Metric) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Upverter Parts Library - -Created by Upverter.com - - -IC AUTHENTICATION CHIP 8SOIC - - - - - - - - - - ->NAME - - - - - - - - - - - -IC AUTHENTICATION CHIP 8SOIC - - - - - - - - - - - - ->NAME - - - - - - - - - - - -IC AUTHENTICATION CHIP 8SOIC - - - - - - - - - - - - ->NAME - - - - - - - - - - - -IC AUTHENTICATION CHIP 8SOIC - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - -IC AUTHENTICATION CHIP 8SOIC - - - - - - - - - - - - ->NAME -ATECC608A-SSHDA-B - - - - - - - - - - - - -IC AUTHENTICATION CHIP 8SOIC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>SparkFun Sensors</h3> -This library contains sensors- accelerometers, gyros, compasses, magnetometers, light sensors, imagers, temp sensors, etc. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - - - - - - ->Name ->Value - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->Name ->Value - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - -U.FL (UMCC), IPEX MHF1 Connector Receptacle, Male Pin 50Ohm Surface Mount Solder <a href="https://pricing.snapeda.com/parts/RSP-122811-01/Samtec%20Inc./view-part?ref=eda">Check availability</a> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -SD CARD -IMAGE SENSOR -CONNECTOR -STM32H7xx MCU -RGB-IR LEDs -USB Connector -I/O HEADERS -The output voltage is -calculated as below: - Vo = 0.6 * (1+RT/RB) - - -Notes: - - - - - - - - - -32-BIT SDRAM - - - - -QSPI Flash - - - - -* No vias under socket -! - - - - -* Length match SD signals. - -! - - - - -* Length match SDRAM signals. -* Length match QSPI signals. -* Use 50ohm feed line -! - - - - -WiFi/Bluetooth -* Length match SD signals. - -USB HS - -Oscillators - - - - -! - - - - -* Length match USB signals. -* Length match ULPI signals. -! - - - - -* Length match USB signals. -Copyright (c) 2021-2023 OpenMV <openmv@openmv.io> -This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 License. -To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/ - -* No vias under USB Port. -Accel - - - - -Security -! - - - - -* For 2.2uF 0402 caps use +/- 10% 6.3V X5R caps e.g. (CL10A225KP8NNNC) -* For 0.1uF 0201 caps use +/- 10% 6.3V X5R caps e.g. (CL03A104KQ3NNNC) -* For 0.1uF 0402 caps use +/- 10% 10V X5R caps e.g. (GMC04X5R104K10NT) -* For 1uF 0402 caps use +/- 10% 6.3V X5R caps e.g. (GMC04X5R105K6R3NT) -* Swapped to make - layout easier -Battery Charging - -Power -* For 0402 resistors use +/- 5% (or 1% if required) - 1/16W -* For 4.7uF 0603 caps use +/- 10% 6.3V X5R caps e.g. (CL10A475KQ8NNNC) -* For 47uF 1206 caps use +/- 10% 6.3V Tantalum caps e.g. (F930J476KAA) -* No vias under connector -! - - - - - -* Length match DCMI signals. - -White -LEDs - - -ToF -* USBEN is pulled up -to prevent USB from -resetting in low power - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Since Version 6.2.2 text objects can contain more than one line, -which will not be processed correctly with this version. - - -Since Version 8.2, EAGLE supports online libraries. The ids -of those online libraries will not be understood (or retained) -with this version. - - -Since Version 8.3, EAGLE supports URNs for individual library -assets (packages, symbols, and devices). The URNs of those assets -will not be understood (or retained) with this version. - - -Since Version 8.3, EAGLE supports the association of 3D packages -with devices in libraries, schematics, and board files. Those 3D -packages will not be understood (or retained) with this version. - - -Since Version 8.4, EAGLE supports properties for SPICE simulation. -Probes in schematics and SPICE mapping objects found in parts and library devices -will not be understood with this version. Update EAGLE to the latest version -for full support of SPICE simulation. - - - -- cgit v1.2.3