updated repo structure

2 files changed, 59 insertions, 0 deletions

diff --git a/OLD_CODE_REMOVE_LATER/debug/prewk/comm/uart/arduino_uart/arduino_uart.ino b/OLD_CODE_REMOVE_LATER/debug/prewk/comm/uart/arduino_uart/arduino_uart.ino
new file mode 100644
index 0000000..6385695
--- /dev/null
+++ b/OLD_CODE_REMOVE_LATER/debug/prewk/comm/uart/arduino_uart/arduino_uart.ino
@@ -0,0 +1,17 @@
+void setup() {
+  // Initialize Serial1 with a baud rate of 19200
+  Serial1.begin(19200);
+  Serial.begin(19200); // Initialize Serial for debugging
+}
+
+void loop() {
+  // Check if there is any data available to read from Serial1
+  if (Serial1.available()) {
+    // Read the most recent byte
+    byte byteRead = Serial1.read();
+    // Echo the value that was read
+    Serial1.write(byteRead);
+    // Print the received byte for debugging
+    Serial.print((char)byteRead);
+  }
+}
diff --git a/OLD_CODE_REMOVE_LATER/debug/prewk/comm/uart/arduino_uart_1.py b/OLD_CODE_REMOVE_LATER/debug/prewk/comm/uart/arduino_uart_1.py
new file mode 100644
index 0000000..3996cf7
--- /dev/null
+++ b/OLD_CODE_REMOVE_LATER/debug/prewk/comm/uart/arduino_uart_1.py
@@ -0,0 +1,42 @@
+# This work is licensed under the MIT license.
+# Copyright (c) 2013-2023 OpenMV LLC. All rights reserved.
+# https://github.com/openmv/openmv/blob/master/LICENSE
+#
+# Basic UART communications between OpenMV and Arduino Uno.
+
+# 1) Wire up your OpenMV Cam to your Arduino Uno like this:
+#
+# OpenMV Cam Ground Pin   ----> Arduino Ground
+# OpenMV Cam UART3_TX(P4) ----> Arduino Uno UART_RX(0)
+# OpenMV Cam UART3_RX(P5) ----> Arduino Uno UART_TX(1)
+
+# 2) Uncomment and upload the following sketch to Arduino:
+#
+# void setup() {
+#   // put your setup code here, to run once:
+#   Serial.begin(19200);
+# }
+#
+# void loop() {
+#   // put your main code here, to run repeatedly:
+#   if (Serial.available()) {
+#     // Read the most recent byte
+#     byte byteRead = Serial.read();
+#     // ECHO the value that was read
+#     Serial.write(byteRead);
+#   }
+# }
+
+# 3) Run the following script in OpenMV IDE:
+
+import time
+from pyb import UART
+
+# UART 3, and baudrate.
+uart = UART(3, 19200, timeout_char=200)
+
+while True:
+    uart.write("Hello World!\n")
+    if uart.any():
+        print(uart.read())
+    time.sleep_ms(1000)