did a lot of thing lately

1 files changed, 0 insertions, 112 deletions

diff --git a/OLD_CODE_REMOVE_LATER/debug/prewk/motordriver/PID/PID.ino b/OLD_CODE_REMOVE_LATER/debug/prewk/motordriver/PID/PID.ino
deleted file mode 100644
index c7f351a..0000000
--- a/OLD_CODE_REMOVE_LATER/debug/prewk/motordriver/PID/PID.ino
+++ /dev/null
@@ -1,112 +0,0 @@
-#include <TimerThree.h>
-#include <QuickPID.h>
-
-
-//https://www.pololu.com/product/2997
-//https://www.pololu.com/product/4861
-
-
-float Setpoint, Input, Output;
-float Kp = 2, Ki = 5, Kd = 1;
-QuickPID myPID(&Input, &Output, &Setpoint);
-
-
-int enA = 1;  // PWM pin
-int enB = 2;  // GND
-int pwm1 = 3; // Motor control pin 1
-int pwm2 = 4; // Motor control pin 2
-int encoA = 5; // Encoder pin A
-int encoB = 6; // Encoder pin B
-
-double sp = 0.00;
-double rpm = 0.00;
-volatile long encount = 0;
-unsigned long Ltime = 0;
-unsigned long Ctime = 0;
-unsigned long Ptime = 0;
-
-volatile int PWMval = 0;   // PWM value 0-1000
-
-void setup() {
-  pinMode(enA, OUTPUT);
-  pinMode(enB, OUTPUT);
-  pinMode(pwm1, OUTPUT);
-  pinMode(pwm2, OUTPUT);
-
-  pinMode(encoA, INPUT_PULLUP);
-  pinMode(encoB, INPUT_PULLUP);
-
-  attachInterrupt(digitalPinToInterrupt(encoA), encoderISR, CHANGE);
-  attachInterrupt(digitalPinToInterrupt(encoB), encoderISR, CHANGE);
-
-  Timer3.initialize(800); // 800 microseconds or 1.25kHz
-  Timer3.attachInterrupt(updatePWM); 
-
-  Serial.begin(9600);
-
-  // PID settings
-  Input = rpm;
-  Setpoint = 500;
-  myPID.SetTunings(Kp, Ki, Kd);
-  myPID.SetMode(myPID.Control::automatic);
-}
-
-void updatePWM() {
-  static int counter = 0;
-
-  if (counter < PWMval) {
-    digitalWrite(enA, HIGH);
-  } else {
-    digitalWrite(enA, LOW);
-  }
-
-  counter++;
-  if (counter >= 1000) {
-    counter = 0;
-  }
-}
-
-void mcpsoftpwm(int value) {
-  if (value < 0) value = 0;
-  if (value > 1000) value = 1000;
-
-  PWMval = value; 
-}
-
-void encoderISR() {
-  encount++;
-}
-
-void readenc() {
-  Ctime = micros();
-  Ptime = Ctime - Ltime;
-  Ltime = Ctime;
-  rpm = (encount / 211.2) * (60000000.0 / Ptime); // Adjust the encoder counts per revolution here if necessary
-  encount = 0;
-}
-
-void resetenc() {
-  Ctime = micros();
-  Ltime = Ctime;
-  encount = 0;
-}
-
-void move(int sped) {
-  sp = abs(sped) * 0.1;
-  mcpsoftpwm(sp);
-  digitalWrite(enB, LOW);
-  if (sped < 0) {
-    digitalWrite(pwm1, LOW);
-    digitalWrite(pwm2, HIGH);
-  } else {
-    digitalWrite(pwm1, HIGH);
-    digitalWrite(pwm2, LOW);
-  }
-}
-
-void loop() {
-  Input = rpm;
-  myPID.Compute();
-  move(Output);
-  
-}