1 files changed, 0 insertions, 36 deletions
diff --git a/spi_comm/openmv_slave/spi_com_master.py b/spi_comm/openmv_slave/spi_com_master.py
deleted file mode 100644
index 6e10881..0000000
--- a/spi_comm/openmv_slave/spi_com_master.py
+++ /dev/null
@@ -1,36 +0,0 @@
-from machine import SPI, Pin
-deg = 40
-binary = format(deg, 'b')
-print(binary)
-
-spi = SPI(0, baudrate=400000)           # Create SPI peripheral 0 at frequency of 400kHz.
-                                        # Depending on the use case, extra parameters may be required
-                                        # to select the bus characteristics and/or pins to use.
-cs = Pin(4, mode=Pin.OUT, value=1)      # Create chip-select on pin 4.
-
-try:
-    cs(0)                               # Select peripheral.
-    spi.write(b"12345678")              # Write 8 bytes, and don't care about received data.
-finally:
-    cs(1)                               # Deselect peripheral.
-
-try:
-    cs(0)                               # Select peripheral.
-    rxdata = spi.read(8, 0x42)          # Read 8 bytes while writing 0x42 for each byte.
-finally:
-    cs(1)                               # Deselect peripheral.
-
-rxdata = bytearray(8)
-try:
-    cs(0)                               # Select peripheral.
-    spi.readinto(rxdata, 0x42)          # Read 8 bytes inplace while writing 0x42 for each byte.
-finally:
-    cs(1)                               # Deselect peripheral.
-
-txdata = b"12345678"
-rxdata = bytearray(len(txdata))
-try:
-    cs(0)                               # Select peripheral.
-    spi.write_readinto(txdata, rxdata)  # Simultaneously write and read bytes.
-finally:
-    cs(1)                               # Deselect peripheral.